|
|
PDF AMS302 Data sheet ( Hoja de datos )
| Número de pieza | AMS302 | |
| Descripción | (AMSxxxx) Light Sensor | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AMS302 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
Light Sensor (AMS1, 3)
Cadmium-free sensor
with spectral response
LIGHT SENSOR
The Through-hole Type for easy
implementation as a CdS cell replacement
• SMD type
L 2.0mm .079inch
W 3.2mm .126inch
H 1.0mm .039inch
14
Amplifier
23
12 Anode
34 Cathode
www.DataSheet4U.com
• Through-hole type
5.0 mm dia.
.197 inch dia.
(Surface of resin)
1 Amplifier 2
1 Anode
2 Cathode
RoHS Directive compatibility information
http://www.nais-e.com/
FEATURES
1. Built-in optical filter for spectral
response similar to that of the human
eye.
Peak sensitivity wavelength is 580 nm
1.0
NaPiCa spectral
Human spectral
0.8
0.6
0.4
0.2
0
300 400 500 600 700 800 900 1000 1100
Wavelength, nm
2. Photocurrent is proportional to
illumination. (linear output)
High photocurrent is achieved by built-in
photocurrent amp.
IL = 260 µA (typical)
Ev = 100 lx (florescent light)
3. Uses environmentally friendly
silicon chips.
4. Lead-free.
5. Operates on 1.5 to 6 V DC, which is
suitable for battery operation.
6. Compact, SMD package
Same through-hole shape as CdS cell.
TYPICAL APPLICATIONS
1. Brightness detection for LCD backlight
control for LCD devices (mobile phones,
LCD TVs, car navigation systems, mobile
PCs, and PDAs).
2. Brightness detection for controlling the
keypad backlight in mobile phones.
3. Brightness detection for circuits in
household lighting, crime prevention
lighting, and automatic lighting for
bicycle.
4. Brightness detection for wall clocks
(radio clocks).
TYPES
Packing quantity: Tape and reel package SMD type:
Inner 3,000 pcs., Outer 3,000 pcs.
Tape and reel pckage Through-hole type: Inner 2,000 pcs., Outer 2,000 pcs.
Baggage package Through-hole type: Inner 500 pcs., Outer 1,000 pcs.
Part No.
Photo current
Tape and reel package
Tape and reel package
Baggage package
SMD type (Picked from the 1/4-pin side)
Through-hole type
260 µA*
AMS104Y
AMS302T
AMS302
Note*: Ev = 100 lx (Fluorescent lamp is used as light source)
Tape package is the standard packing style.
Please inquire if you need tape and reel packaging that allows the SMD type to be picked from the 2/3-pin side.
RATINGS
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
Symbol
AMS104/AMS302
Reverse voltage
VR –0.5 to 8 V
Photocurrent
IL 5 mA
Power dissipation
P 40 mW
Operating temperature
Topr –30 to +85°C –22 to +185°F
Storage temperature
Tstg –40 to +100°C –40 to +176°F
2. Recommended operating condition
Item
Reverse voltage
Minimum
Maximum
Symbol
VR
AMS104/AMS302
1.5 V
6V
Remarks
Non-condensing at low temperatures
Non-condensing at low temperatures
Remarks
—
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
1 page  
Light Sensor (AMS1, 3)
7. Cleaning solvents compatibility
We recommend dip cleaning with an
organic solvent for removal of solder flux
etc. If you cannot avoid using ultrasonic
cleansing, please ensure that the
following conditions are met, and check
beforehand for defects.
• Frequency: 27 to 29 kHz
• Ultrasonic power:
No greater than 0.25W/cm2
• Cleaning time:
No longer than 30 s
• Cleanser used: Asahiklin AK-225
• Other:
Submerge in solvent in order to prevent
the PCB and sensors from being
contacted directly by the ultrasonic
vibrations.
Note: Applies to unit area ultrasonic power for
ultrasonic baths.
8. Transportation
Extreme vibration during transport will
warp the lead or damage the sensor.
Handle the outer and inner boxes with
care.
9. Avoid using the sensor in
environments containing excessive
amounts of steam, dust, corrosive
gas, or where organic solvents are
present.
10. Lead forming and cutting
1) Lead forming must be done at normal
temperature before soldering
2) The bent and cut position on leads
should not be closer than 3mm .118inch
to the base of leads.
3) Lead forming and cutting must be
done while fixing the base of leads.
4) Avoid mounting with stress at the base
of leads.
11. The following shows the packaging format
1) SMD type tape and reel
Type
Tape dimensions
www.DataSheet4U.com
Anode side
0.2±0.05
.008±.002
Device
mounted
on tape
4.0±0.1
.157±.004
Light sensor
NaPiCa
SMD type
AMS104Y
1.5±0.3
.059±.012
3.6±0.1
.142±.004
2.4±0.1
.094±.004
Cathode side
4.0±0.1
.157±.004
Direction of
picking
2.0±0.1
.079±.004
1.5+−00.1 dia.
.059+−.0004 dia.
1.75±0.1
.069±.004
1.0±0.1 dia.
.039±.004 dia.
8.0±0.2
.315±.008
3.5±0.1
.138±.004
Note) When picked from 1 and 4-pin side: Part No. AMS104Y (Shown above)
Dimensions of tape reel
21.0±0.8 dia.
.827±.031 dia.
mm inch
11.4±1.0
.449±.039
2.0±0.5
.079±.020
178±2 dia.
7.008±.079 dia.
60±0.5 dia.
2.362±.020 dia.
13.0±0.5 dia.
.512±.020 dia.
9.0±0.3
.354±.012
2) Through-hole type tape and reel
Anode side
P2 P
Cathode side
∆p
Light sensor
NaPiCa
Through-hole type
AMS302T
P0 F
Note) Zigzag tape style is used.
Tape dimensions
mm inch
Symbol
Symbol
Feed hole pitch
P0
∆h Product interval pitch
P
Product distance
Product bottom
distance
Lead interval
P2
H
F
Product slant
∆h
Product tilt
∆p
Tape width
W
Holding tape width
W0
Feed hole position
W1
Holding tape distance W2
Feed hole diameter
D0
Tape thickness
t
Dimensions
12.7±0.3
.500±.012
12.7±1.0
.500±.039
6.35±1.3
.250±.051
20.5±1.0
.807±.039
2.54±0.5
.100±.020
0±1.0
0±.039
0±1.0
0±.039
18.0
+1.0
−0.5
.709
+.039
−.020
13.0±0.3
.512±.012
9.0
+0.75
−0.5
.354
+.030
−.020
0 to 0.5
0 to .020
3.8±0.2
.150±.008
0.5±0.2
.020±.008
Remarks
Included holding
tape thickness
L Max.: 11.0 .433
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet AMS302.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AMS302 | (AMSxxxx) Light Sensor | Panasonic |
| AMS302T | (AMSxxxT) Light Sensor | Panasonic |
| AMS303 | MICROPOWER COMPARATOR |  AMS |
| AMS3089 | 12 KHz / 16 KHz Metering Pulse Detector |  Aptek Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |