|
|
PDF ML610429 Data sheet ( Hoja de datos )
| Número de pieza | ML610429 | |
| Descripción | 8-bit Microcontroller | |
| Fabricantes | LAPIS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ML610429 (archivo pdf) en la parte inferior de esta página. Total 29 Páginas | ||
|
No Preview Available !
ML610429
8-bit Microcontroller with a Built-in LCD driver
FEDL610429-05
Issue Date: Apr.24, 2015
GENERAL DESCRIPTION
This LSI is a high-performance 8-bit CMOS microcontroller into which rich peripheral circuits, such as synchronous serial port,
UART, I2C bus interface (master), melody driver, battery level detect circuit, RC oscillation type A/D converter, and LCD
driver, are incorporated around 8-bit CPU nX-U8/100.
The CPU nX-U8/100 is capable of efficient instruction execution in 1-instruction 1-clock mode by 3-stage pipe line architecture
parallel processing. The Mask ROM is installed and is most suitable for battery-driven applications.
FEATURES
• CPU
− 8-bit RISC CPU (CPU name: nX-U8/100)
− Instruction system: 16-bit instructions
− Instruction set: Transfer, arithmetic operations, comparison, logic operations, multiplication/division, bit
manipulations, bit logic operations, jump, conditional jump, call return stack manipulations, arithmetic
shift, and so on
− Minimum instruction execution time
30.5 µs (@32.768 kHz system clock)
0.24 4µs (@4.096 MHz system clock)
• Internal memory
− Internal 48KByte Mask ROM (24K×16 bits) (including unusable 1KByte TEST area)
− Internal 3KByte Data RAM (3072×8 bits), 1KByte Display Allocation RAM (1024 x 8bit)
− Internal 192-byte RAM for display
• Interrupt controller
− 2 non-maskable interrupt sources (Internal source: 1, External source: 1)
− 27 maskable interrupt sources (Internal sources: 19, External sources: 8)
• Time base counter
− Low-speed time base counter ×1 channel
Frequency compensation (Compensation range: Approx. −488ppm to +488ppm. Compensation accuracy: Approx.
0.48ppm)
− High-speed time base counter ×1 channel
• Watchdog timer
− Non-maskable interrupt and reset
− Free running
− Overflow period: 4 types selectable (125ms, 500ms, 2s, and 8s)
• Timers
− 8 bits × 2 channels (16-bit configuration available)
• 1 kHz timer
− 10 Hz/1 Hz interrupt function
1/29
1 page  
ML610429 Chip Dimension
FEDL610429-05
ML610429
PP2200 9944
PP2211
P22
999565
P40 97
P41 98
RESET_N
P44
P45
P46
P47
P30
P31
P34
P32
P33
P35
TEST
VDD
VDDL
VSS
VDDX
XT0
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
XT1 116
P42 117
P43 118
VL1 119
VL2 120
VL3 121
VL4 122
C1 123
C2 124
AJX
Device Name
"AJX"
Device Name
"29x"
29x
6622 SSEEGG4422
6611 SSEEGG4411
60 SEG40
59 SEG39
58 SEG38
57 SEG37
56 SEG36
55 SEG35
54 SEG34
53 SEG33
52 SEG32
51 SEG31
50 SEG30
49 SEG29
48 SEG28
47 SEG27
46 SEG26
45 SEG25
44 SEG24
43 SEG23
42 SEG22
41 SEG21
40 SEG20
39 SEG19
38 SEG18
37 SEG17
36 SEG16
35 SEG15
34 SEG14
33 SEG13
32 SEG12
31 SEG11
Chip size:
PAD count:
Minimum PAD pitch:
PAD aperture:
Chip thickness:
Voltage of the rear side of chip:
2.99 mm × 3.11 mm
124 pins
80 µm
70 µm × 70 µm
350 µm
VSS level
Figure 2 ML610429 Chip Dimension
Note:
Figure 6 is an image figure of the order of PAD, and it differs from an actual image. Refer to the PAD coordinate for detailed
arrangement.
A chip angle can be checked by the distinguishing mark of three figures.
5/29
5 Page 
FEDL610429-05
ML610429
Pin name I/O
Description
UART
TXD0
O UART data output pin. This pin is used as the secondary function of the
P43 pin.
RXD0
I UART data input pin. This pin is used as the secondary function of the
P42 or the primary function of the P02 pin.
I2C bus interface
SDA
I/O
SCL O
I2C data input/output pin. This pin is used as the secondary function of the
P40 pin. This pin has an NMOS open drain output. When using this pin as
a function of the I2C, externally connect a pull-up resistor.
I2C clock output pin. This pin is used as the secondary function of the P41
pin. This pin has an NMOS open drain output. When using this pin as a
function of the I2C, externally connect a pull-up resistor.
Synchronous serial (SSIO)
Primary/
Secondary/
Tertiary
Secondary
Primary/Se
condary
Secondary
Secondary
Logic
Positive
Positive
Positive
Positive
SCK0 I/O
SIN0
I
SOUT0 O
PWM
PWM0
O
T0P0CK I
PWM1
O
T1P1CK I
PWM2
O
P2CK
I
External interrupt
NMI I
EXI0-7
I
Timer
Synchronous serial clock input/output pin. This pin is used as the tertiary
function of the P41 or P45 pin.
Synchronous serial data input pin. This pin is used as the tertiary function
of the P40 or P44 pin.
Synchronous serial data output pin. This pin is used as the tertiary
function of the P42 or P46 pin.
PWM0 output pin. This pin is used as the tertiary function of the P43 or
P34 pin.
PWM0 external clock input pin. This pin is used as the primary function of
the P44 pin.
PWM1 output pin. This pin is used as the tertiary function of the P47 or
P35 pin.
PWM1 external clock input pin. This pin is used as the primary function of
the P45 pin.
PWM2 output pin. This pin is used as the tertiary function of the P20 or
P30 pin.
PWM2 external clock input pin. This pin is used as the primary function of
the P02 pin.
External non-maskable interrupt input pin. An interrupt is generated on
both edges.
External maskable interrupt input pins. Interrupt enable and edge
selection can be performed for each bit by software. These pins are used
as the primary functions of the P00-P07 pins.
Tertiary
—
Tertiary Positive
Tertiary Positive
Tertiary Positive
Primary
—
Tertiary Positive
Primary
—
Tertiary Positive
Primary
—
Primary
Primary
Positive/
negative
Positive/
negative
T0P0CK
T1P1CK
Melody
MD0
LED drive
LED0-2
I External clock input pin used for Timer 0. This pin is used as the primary
function of the P44 pin.
I External clock input pin used for Timer 1. This pin is used as the primary
function of the P45 pin.
Primary
Primary
—
—
O Melody/buzzer signal output pin. This pin is used as the secondary
function of the P22 pin.
Secondary Positive/
negative
O Nch open drain output pins to drive LED.
Primary Positive/
negative
11/29
11 Page | ||
| Páginas | Total 29 Páginas | |
| PDF Descargar | [ Datasheet ML610429.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ML610421 | 8-bit Microcontroller | LAPIS |
| ML610426 | 8-bit Microcontroller | LAPIS |
| ML610429 | 8-bit Microcontroller | LAPIS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |