|
|
Número de pieza | DSC2033 | |
Descripción | Low-Jitter Configurable Dual LVDS Oscillator | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DSC2033 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! DSC2033
Low-Jitter Configurable Dual LVDS Oscillator
General Description
The DSC2033 series of high performance
dual output LVDS oscillators utilize a proven
silicon MEMS technology to provide excellent
jitter and stability while incorporating
additional device functionality. The two
outputs are controlled by separate supply
voltages to allow for high output isolation.
The frequencies of the outputs can be
identical or independently derived from a
common PLL frequency source.
The
DSC2033 has provision for up to eight user-
defined pre-programmed, pin-selectable
output frequency combinations.
DSC2033 is packaged in a 14-pin 3.2x2.5
mm QFN package and available in
temperature grades from Ext. Commercial to
Industrial.
Block Diagram
Features
Low RMS Phase Jitter: <1 ps (typ)
High Stability: ±10, ±25, ±50 ppm
Wide Temperature Range
o Industrial: -40° to 85° C
o Ext. commercial: -20° to 70° C
High Supply Noise Rejection: -50 dBc
Two Independent LVDS Outputs
Pin-Selectable Configurations
o 3-bit Output Frequency Combinations
Short Lead Times: 2 Weeks
Wide Freq. Range:
o LVDS output: 2.3 – 460 MHz
Miniature Footprint of 3.2x2.5mm
Excellent Shock & Vibration Immunity
o Qualified to MIL-STD-883
High Reliability
o 20x better MTF than quartz oscillators
Supply Range of 2.25 to 3.6 V
Lead Free & RoHS Compliant
Applications
Storage Area Networks
o SATA, SAS, Fibre Channel
Passive Optical Networks
o EPON, 10G-EPON, GPON, 10G-PON
Ethernet
o 1G, 10GBASE-T/KR/LR/SR, and FCoE
HD/SD/SDI Video & Surveillance
PCI Express
_____________________________________________________________________________________________________________________________ _________________
DSC2033
Page 1
MK-Q-B-P-D-12042609-2
1 page DSC2033
Low-Jitter Configurable Dual LVDS Oscillator
Solder Reflow Profile
260°C
20-40
Sec
217°C
200°C
150°C
25°C
60-180
Sec
Pre heat
8 min max
60-150
Sec
Reflow
Cool
Time
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp) 3°C/Sec Max.
Preheat Time 150°C to 200°C
60-180 Sec
Time maintained above 217°C
60-150 Sec
Peak Temperature
255-260°C
Time within 5°C of actual Peak
20-40 Sec
Ramp-Down Rate
6°C/Sec Max.
Time 25°C to Peak Temperature
8 min Max.
Package Dimensions
3.2 x 2.5 mm 14 Lead Plastic Package
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information
is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and
descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted
by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims
any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the
body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or
sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any
damages resulting from such use or sale.
MICREL, Inc.
●
2180 Fortune Drive,
San Jose, California
95131 ●
USA
Phone: +1 (408) 944-0800
●
●
www.micrel.com
_____________________________________________________________________________________________________________________________ _________________
DSC2033
Page 5
MK-Q-B-P-D-12042609-2
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet DSC2033.PDF ] |
Número de pieza | Descripción | Fabricantes |
DSC2030 | Low-Jitter Configurable LVDS Oscillator | Micrel Semiconductor |
DSC2031 | Low-Jitter Configurable Dual LVDS-CMOS Oscillator | Micrel |
DSC2032 | Low-Jitter Configurable LVDS-LVPECL Oscillator | Micrel |
DSC2033 | Low-Jitter Configurable Dual LVDS Oscillator | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |