|
|
Número de pieza | ESD0P8RFL | |
Descripción | RF ESD Protection Diodes | |
Fabricantes | Infineon | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ESD0P8RFL (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! RF ESD Protection Diodes
• ESD protection of RF antenna /
interfaces or ultra high speed data lines acc. to:
IEC61000-4-2 (ESD): ± 20 kV (air / contact)
IEC61000-4-4 (EFT): 40 A (5/50 ns)
IEC61000-4-5 (surge): 10 A (8/20 µs)
• Very low line capacitance: 0.8 pF @ 1 GHz
( 0.4 pF per diode)
• Ultra low series inductance: 0.4 nH per diode
• Very low clamping voltage
• Ultra small leadless package 1.2 x 0.8 x 0.39 mm
• Pb-free (RoHS compliant) package
Applications in anti-parallel configuration
• For low RF signal levels without superimposed
DC voltage: e.g. GPS, XM-Radio, Sirius, DVB,
DMB, DAB, Remote Keyless Entry
Applications in rail-to-rail configuration
• For high RF signal levels or low RF signal levels
with superimposed DC voltage: e.g. HDMI, S-ATA,
Gbit Ethernet
• For more technical details on ESD and Antenna
protection please refer to Application Note
No.103 on www.infineon.com/tvsdiodes
ESD0P8RFL
43
D1 D2
12
Type
ESD0P8RFL
Package
TSLP-4-7
Configuration
anti-parallel
1
ESD0P8RFL
Marking
E8
2011-06-27
1 page 1. Application example
1 RF signal channel, anti-parallel configuration,
please refer also to Application Note No.103
ESD0P8RFL
1 protected signal line,
superimposed DC voltage up to
±VF (diode forward volatge) I/O
ESD
sensitive
circuit
Line to ground capacitance
0.8 pF @1 GHz
The protection diode should be
placed very close to the location
where the ESD or other transients
can occur to keep loops and
inductances as small as possible.
Grounded pins should be
connected in parallel directly to a
ground plane on the board.
2. Application example
1 RF signal channel, rail-to-rail configuration
1 protected signal line,
superimposed DC voltage up to
+Vcc (voltage supply)
I/O
ESD
sensitive
circuit
+Vcc
Line to ground capacitance
0.8 pF @1 GHz
Cathode of one diode should be
connected to the positive supply
voltage +Vcc and anode of the
opposite diode should be
connected directly to a ground
plane on the board. Clamped
input voltage at I/O port is limited
to Vcc + VF at positive transients
and 0V - VF at negative transients
(VF ... diode forward voltage
drop).
5 2011-06-27
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet ESD0P8RFL.PDF ] |
Número de pieza | Descripción | Fabricantes |
ESD0P8RFL | RF ESD Protection Diodes | Infineon |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |