|
|
PDF MCW406AT Data sheet ( Hoja de datos )
| Número de pieza | MCW406AT | |
| Descripción | Precision Wide Terminal Thin Film Chip Resistors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MCW406AT (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
www.vishay.com
MCW 0406 AT - Precision
Vishay Beyschlag
Precision Wide Terminal Thin Film Chip Resistors
MCW 0406 AT Precision Wide Terminal Resistors are the
perfect choice for most fields of modern professional power
measurement electronics where reliability, stability, power
dissipation, and robust design is of major concern.
Beside extremely high power ratings, the MCW 0406 AT
is characterized by extraordinary temperature cycling
robustness, verified through extensive testing.
The permissible power rating is specified with 250 mW.
Typical applications include power electronics in automotive
and industrial appliances.
FEATURES
• Rated dissipation P70 up to 250 mW
• Resistance range down to 1
• Superior temperature cycling robustness
• Operating temperature up to 155 °C
• Advanced Sulfur resistance verified according
to ASTM B 809
• Superior moisture resistivity
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive
• Industrial
• High power applications
TECHNICAL SPECIFICATIONS
DESCRIPTION
Imperial size
Metric size code
Resistance range
Resistance tolerance
Temperature coefficient
Rated dissipation P70 (1)
Operating voltage, Umax. ACRMS or DC
Permissible film temperature, F max. (1)
Operating temperature range
Insulation voltage
1 min; Uins
Continuous
Note
(1) Please refer to APPLICATION INFORMATION, see next page.
MCW 0406 AT
0406
RR1016M
1 to 100 k
± 0.1 %
± 15 ppm/K; ± 25 ppm/K
0.25 W
50 V
155 °C
-55 °C to 155 °C
75 V
75 V
Revision: 22-Jan-15
1 Document Number: 28847
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
FUNCTIONAL PERFORMANCE
MCW 0406 AT - Precision
Vishay Beyschlag
Standard Mode
Power Mode
100
80
60
40
20
0
- 50
0
50 70
100 125
155 175
Derating
Ambient Temperature in °C
Note
• For the permissible resistance change in each operation mode please refer to table MAXIMUM RESISTANCE CHANGE AT RATED
DISSIPATION, above.
TESTS AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
EN 60115-1, generic specification
EN 60115-8 (successor of EN 140400), sectional
specification
EN 140401-801, detail specification
IEC 60068-2-xx, test methods
The parameters stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-801. The table presents only
the most important tests, for the full test schedule refer to
the documents listed above. However, some additional
tests and a number of improvements against those
minimum requirements have been included.
The testing also covers most of the requirements specified
by EIA / ECA-703 and JIS-C-5201-1.
The tests are carried out under standard atmospheric
conditions in accordance with IEC 60068-1, 4.3, whereupon
the following values are applied:
Temperature: 15 °C to 35 °C
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
A climatic category LCT / UCT / 56 is applied, defined by the
lower category temperature (LCT), the upper category
temperature (UCT), and the duration of exposure in the
damp heat, steady state test (56 days).
The components are mounted for testing on printed circuit
boards in accordance with EN 60115-8, 2.4.2, unless
otherwise specified.
Revision: 22-Jan-15
5 Document Number: 28847
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet MCW406AT.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MCW406AT | Precision Wide Terminal Thin Film Chip Resistors | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |