|
|
Número de pieza | BTM8630 | |
Descripción | Bluetooth Module | |
Fabricantes | Buddies | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BTM8630 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
No Preview Available ! http://www.buddies-tech.com
BTM8630 DATASHEET
BTM8630
Bluetooth Module Data Sheet
Document Type:
Document Version:
Release Date:
Bluetooth Module Datasheet
V1.01
Sep 13, 2013
Copyright 2012 by Buddies Technology Limited. All Rights Reserved.
Reproduction of this document, in part of in whole, by any means is prohibited without written permission
from Buddies Technology Limited. The information contained herein is believed to be accurate as of
the date of publication. However, Buddies is not liable for any damages, including indirect or
consequential from the use of software this document represents, or any reliance of the accuracy of
this document. Buddies reserves the right to change the contents of this document at any time
without notice.
This document contains proprietary confidential trade secrets and may be subject to additional
restrictions contained in the licensing agreement under which this document was obtained.
1
1 page http://www.buddies-tech.com
BTM8630 DATASHEET
1.2 Features
Small overall dimension
Bluetooth® V4.0
Class 2 support
Physical connection as SMD type
High quality stereo audio
Music Enhancements: SBC,MP3,AAC and Faststream decoder, Configurable
EQ, Stereo Widening(S3D)
Support SMSC-T
Support A2DP, AVRCP profile
Based on CSR chip set CSR8630
RoHS Compliant
No radio signal interference, support for 802.11 co-existence
※ Some features are optional for customization on demand.
1.3 Application
High Quality Stereo Bluetooth Headsets
High Quality Wired Stereo Headsets
Bluetooth Speakers
5
5 Page http://www.buddies-tech.com
5.PHYSICAL INTERFACE
BTM8630 DATASHEET
5.1 Programmable I/O ports
The module provide 11 lines of programmable bidirectional I/O, Can configured to
different function by firmware.
5.2 Analogue I/O ports
The module has a analogue port AIO_0,typically connections to thermistor for
battery pack temperature measurements during charger control.
5.3 LED Driver
The module provide 3 synchronized PWM LED driver for RGB leds. Can
controlled by firmware. The driver are open-drain outputs, and the LEDs must
pull up to positive supply. Refer to the section 4.1
5.4 Audio Interfaces
Audio interface as following features:
Stereo or dual mono analogue audio output through
SPK_LP,SPK_LN,SPK_RP,SPK_RN.
Stereo and mono analogue input through
LINE_AN,LINE_AP,LINE_BN,LINE_BP.
The module is designed for different output, if a single-ended audio output is
required, use an external differential to single-ended converter.
5.5 Reset
The module is reset from several sources:
Reset# pin
Power on reset
Software configured watch-dog
The Reset pin is an active low reset and is internally filtered using the internal low
frequency clock oscillator. Recommended the low period >10ms.
RAM data not available after cold reset.
11
11 Page |
Páginas | Total 17 Páginas | |
PDF Descargar | [ Datasheet BTM8630.PDF ] |
Número de pieza | Descripción | Fabricantes |
BTM8630 | Bluetooth Module | Buddies |
BTM8635 | Bluetooth Module | Buddies |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |