|
|
PDF AUIRLI2505 Data sheet ( Hoja de datos )
| Número de pieza | AUIRLI2505 | |
| Descripción | Power MOSFET ( Transistor ) | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AUIRLI2505 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
AUTOMOTIVE GRADE
PD - 97766
Features
l Advanced Planar Technology
l Logic-Level Gate Drive
l Low On-Resistance
l Dynamic dv/dt Rating
l 175°C Operating Temperature
l Fast Switching
l Fully Avalanche Rated
l Repetitive Avalanche Allowed up to
Tjmax
l Lead-Free, RoHS Compliant
l Automotive Qualified*
Description
Specifically designed for Automotive applications,
this cellular design of HEXFET® Power MOSFETs
utilizes the latest processing techniques to achieve
low on-resistance per silicon area. This benefit
combined with the fast switching speed and rug-
gedized device design that HEXFET power
MOSFETs are well known for, provides the de-
signer with an extremely efficient and reliable de-
vice for use in Automotive and a wide variety of
other applications.
AUIRLI2505
HEXFET® Power MOSFET
V(BR)DSS
55V
RDS(on) max. 8.0m
ID 58A
S
D
G
TO-220AB Full-Pak
AUIRLI2505
G
Gate
D
Drain
S
Source
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in
the specifications is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect
device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air
conditions. Ambient temperature (TA) is 25°C, unless otherwise specified.
Parameter
Max.
Units
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V
ID @ TC = 100°C Continuous Drain Current, VGS @ 10V
chIDM Pulsed Drain Current
PD @TC = 25°C Power Dissipation
Linear Derating Factor
VGS
EAS
IAR
EAR
dv/dt
Gate-to-Source Voltage
dhSingle Pulse Avalanche Energy (Thermally Limited)
chAvalanche Current
eRepetitive Avalanche Energy
ehPeak Diode Recovery dv/dt
TJ Operating Junction and
58
41
360
63
0.42
± 16
500
54
6.3
5.0
-55 to + 175
A
W
W/°C
V
mJ
A
mJ
V/ns
TSTG
Storage Temperature Range
Soldering Temperature, for 10 seconds (1.6mm from case )
Mounting Torque, 6-32 or M3 screw
Thermal Resistance
Parameter
iRJC
Junction-to-Case
RJA Junction-to-Ambient
y y300
10 lbf in (1.1N m)
Typ.
–––
–––
Max.
2.4
65
°C
Units
°C/W
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
03/14/12
1 page  
AUIRLI2505
www.irf.com
5
5 Page 
AUIRLI2505
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR)
reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products
and services at any time and to discontinue any product or services without notice. Part numbers designated with the
“AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance
and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time
of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with
IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to
support this warranty. Except where mandated by government requirements, testing of all parameters of each product
is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their
products and applications using IR components. To minimize the risks with customer products and applications,
customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and
is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with
alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation.
Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product
or service voids all express and any implied warranties for the associated IR product or service and is an unfair and
deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant
into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of
the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR
products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the
design or manufacture of the product.
IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR
products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as
military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR
has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with
all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR
products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the
designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications,
IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet AUIRLI2505.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AUIRLI2505 | Power MOSFET ( Transistor ) | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |