|
|
Número de pieza | TL1L4-NW0L4A5B | |
Descripción | LED Lamps | |
Fabricantes | Toshiba | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TL1L4-NW0L4A5B (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
No Preview Available ! LED Lamps InGaN and Phosphor
TL1L4-NW0,L4A5B
TL1L4-NW0,L4A5B
1. Applications
• General Lighting
2. Features
(1) Size: 3.5 (L) mm × 3.5 (W) mm × 2.05 (H) mm
(2) High luminous flux LED: 165 lm (typ.) @IF = 350 mA, Ta = 25
(3) Hot Binning: Tested at operating temperature similar to actual set condition.
(4) IF Absolute Maximum Ratings: 1.5 A (max) @Ta = 25
(5) Operating temperature range: Topr = -40 to 125
(6) Color: White (color temperature: 5000 K (typ.))
(7) Color Rendering Index: Ra = 70 (min)
3. Packaging and Pin Assignment
4-4P1A
1: Anode
2: Cathode
Start of commercial production
2015-02
1 2015-06-12
Rev.1.0
1 page TL1L4-NW0,L4A5B
Fig. 7.1 Chromaticity (Hot Binning) Rank (Note)
Note: Test conditions: IF = 350 mA, Tj = 85 , Tolerance: ±0.01
5 2015-06-12
Rev.1.0
5 Page 10.2. Soldering
Following show examples of reflow soldering.
• Temperature Profile (see following figures.)
TL1L4-NW0,L4A5B
Fig. 10.2.1 Temperature Profile for
Lead(Pb)-free Soldering (example)
Table 10.2.1 Temperature Profile for
Lead(Pb)-free Soldering (example)
• The product is evaluated using above reflow soldering conditions. No additional test is performed exceed
the condition as a evaluation. Please perform reflow soldering under the above conditions.
• Please perform the first reflow soldering with reference to the above temperature profile and within 4
weeks of opening the package.
• If a second reflow process is necessary, reflow soldering should be performed within 168 h of the first
reflow under the above conditions. Storage conditions before the second reflow soldering: 30 , 60 % RH
(max)
• Do not perform wave soldering.
• When any soldering corrections are made manually, a hot-plate should be used.
(only once at each soldering point)
10.3. Land Pattern Dimensions (for reference only)
Heatsink pin of this product is the same electric potential as anode electrode. Please do not connect to other
electrical potentials or GND.
(Unit: mm)
11
2015-06-12
Rev.1.0
11 Page |
Páginas | Total 16 Páginas | |
PDF Descargar | [ Datasheet TL1L4-NW0L4A5B.PDF ] |
Número de pieza | Descripción | Fabricantes |
TL1L4-NW0L4A5B | LED Lamps | Toshiba |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |