|
|
PDF MTFDDAC050SAL-1N1AA Data sheet ( Hoja de datos )
| Número de pieza | MTFDDAC050SAL-1N1AA | |
| Descripción | P300 2.5-Inch SATA NAND Flash SSD | |
| Fabricantes | Micron | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MTFDDAC050SAL-1N1AA (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
P300 2.5-Inch NAND Flash SSD
Features
P300 2.5-Inch SATA NAND Flash SSD
MTFDDACxxxSAL1x1
Features
• Micron® SLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported
– PIO modes 3 and 4
– Multiword DMA modes 0, 1, 2
– Ultra DMA modes 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queueing support with 32 com-
mand slot support
• ATA8-ACS2 command set support
• Secure erase (data page) command set
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Performance (empty/steady state)1, 2, 3, 4
– Sequential READ: up to 360/360 MB/s
– Sequential WRITE: up to 275/255 MB/s
– Random READ: up to 60,000/44,000 IOPs
– Random WRITE: up to 45,200/16,000 IOPs
– READ latency: 0.153/0.154ms (TYP)
– WRITE latency: 0.118/0.424ms (TYP)
• Reliability
– MTBF: 2 million hours
– 3-year warranty
– Static and dynamic wear leveling
– Field-upgradable firmware
– Uncorrectable bit error rate (UBER): <1 sector
per 1016 bits read
– Low power consumption: <7W (AVG)
• Endurance: Total bytes written (TBW) – 50GB
( 0.875PB); 100GB (1.75PB); 200GB (3.5PB)
• Mechanical/electrical
– Standard SATA connector
– 5V power (±10%)
– Dimensions: 100.45mm x 69.85mm x 9.5mm
– Weight: 100g
• Operating temperature: 0°C to 70°C
• Humidity (operating): 5% to 95% RH
• Shock and vibration
– 1500G/0.5ms
– 5–500Hz at 3.1G
• Capacity5: 50GB, 100GB, 200GB
Notes:
1. 128K transfers used for sequential READ/
WRITE values.
2. 4K transfers used for random READ/WRITE
latency values.
3. I/O performance numbers as measured us-
ing Iometer with a queue depth of 32 and
write cache disabled.
4. Performance values apply to all drive ca-
pacities.
5. 1GB = 1 billion bytes; formatted capacity is
less.
PDF: 09005aef840793dc
realssd_p300_2_5.pdf - Rev. I 10/11 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
1 page  
P300 2.5-Inch NAND Flash SSD
Architecture
Interface Connectors
The SATA signal segment interface cable has four conductors and three ground connec-
tions. As shown in Package Dimensions, the cable includes a 7-pin signal segment and a
9-pin power segment arranged in a single row with a 1.27mm (0.050in) pitch.
Table 4: SATA Signal Segment Pin Assignments
Signal Name
S1
S2
S3
S4
S5
S6
S7
Type
GND
A
A#
GND
B#
B
GND
Description
Ground
Differential signal pair A and A#
Ground
Differential signal pair B and B#
Ground
Table 5: 2.5-Inch SATA Power Segment Pin Assignments
Pin#
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
Signal Name
V33
V33
V33
GND
GND
GND
V5
V5
V5
GND
DAS1
GND
V12
V12
V12
Description
No connect
No connect
No connect
Ground
Grond
Ground
5V power, precharge
5V power
5V power
Ground
Device activity signal
Ground
No connect
No connect
No connect
Note: 1. Pin 11 (DAS) may be optionally connected to GND.
PDF: 09005aef840793dc
realssd_p300_2_5.pdf - Rev. I 10/11 EN
5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.
5 Page 
P300 2.5-Inch NAND Flash SSD
Device ID
Table 6: IDENTIFY Device ID (Continued)
• F = The content of the word is fixed and does not change
• V = The content of the word is variable and may change depending on the state of the device or the commands execu-
ted by the device
• X = The fixed or variable type of this field is not defined in the governing standard
• R = The content of the word is reserved and shall be zero
Word
Bit(s)
Setting
Default Value Description
78 15–7
000000000b
Reserved for SATA
6F
1b 1 = Supports software settings preservation
5 0b Reserved for SATA
4F
0b 1 = Supports in-order data delivery
3F
1b 1 = Device supports initiating interface power management
(DIPM)
2F
1b 1 = Supports DMA setup auto activation
1F
0b 1 = Supports nonzero buffer offsets
0F
0b Shall be cleared to 0
79 15–7
000000000b
Reserved for SATA
6V
1b 1 = Software settings preservation enabled
5 0b Reserved for SATA
4V
0b 1 = In-order data delivery enabled
3V
0b 1 = Device initiated power management enabled
2V
0b 1 = DMA setup auto-activation enabled
1V
0b 1 = Nonzero buffer offsets enabled
0F
0b Shall be cleared to 0
80 15–10
000000b
Reserved
9F
1b 1 = Supports ATA8-ACS2
8F
1b 1 = Supports ATA-8-ACS
7F
1b 1 = Supports ATA/ATAPI-7
6F
1b 1 = Supports ATA/ATAPI-6
5F
1b 1 = Supports ATA/ATAPI-5
4F
1b 1 = Supports ATA/ATAPI-4
3X
0b Obsolete
2X
0b Obsolete
1X
0b Obsolete
0 0b Reserved
81 Minor version number
F
0028h
0028h = ATA8-ACS version 6
PDF: 09005aef840793dc
realssd_p300_2_5.pdf - Rev. I 10/11 EN
11
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2010 Micron Technology, Inc. All rights reserved.
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MTFDDAC050SAL-1N1AA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MTFDDAC050SAL-1N1AA | P300 2.5-Inch SATA NAND Flash SSD | Micron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |