DataSheet.es    


PDF A4770 Data sheet ( Hoja de datos )

Número de pieza A4770
Descripción POWER SWITCH
Fabricantes AiT Semiconductor 
Logotipo AiT Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de A4770 (archivo pdf) en la parte inferior de esta página.


Total 15 Páginas

No Preview Available ! A4770 Hoja de datos, Descripción, Manual

AiT Semiconductor Inc.
www.ait-ic.com
A4770
POWER SWITCH
100mΩ POWER DISTRIBUTION
DESCRIPTION
The A4770 is an integrated 100mΩ power switch
for self-powered and bus-powered Universal Series
Bus (USB) applications. A built-in charge pump is
used to drive the N-channel NMOSFET that is free
of parasitic body diode to eliminate any reversed
current flow across the switch when it is powered
off. Its low quiescent supply current (23μA) and
small package (SOT-25) is particularly suitable in
battery-powered portable equipment.
FEATURES
100mΩ Typ. High-Side NMOSFET (SOT-25)
Guaranteed 1.1A Continuous Current
1.5A Current Limit
Small SOT-25 Package Minimizes Board Space
Soft Start
Thermal Protection
Low 23uA Supply Current
Wide Input Voltage Range: 2.2V ~ 6V
Available in SOT-25 Package
Several protection functions include soft start to
limit inrush current during plug-in, current limiting at
1.5A to meet USB power requirement, and thermal
shutdown to protect damage under over current
conditions.
The A4770 is available in SOT-25 package.
APPLICATION
Battery-Powered Equipment
Motherboard USB Power Switch
USB Device Power Switch
Hot-Plug Power Supplies
Battery-Charger Circuits
ORDERING INFORMATION
TYPICAL APPLICATION
Package Type
Part Number
SOT-25
A4770E5R
E5
A4770E5VR
Note
R: Tape & Reel,
V: Green Package
AiT provides all Pb free products
Suffix V means Green Package
REV1.0
- JUL 2011 RELEASED -
-1-

1 page




A4770 pdf
AiT Semiconductor Inc.
www.ait-ic.com
A4770
POWER SWITCH
100mΩ POWER DISTRIBUTION
TYPICAL PERFORMANCE CHARACTERISTICS
1. Supply Current vs. Temperature
2. Supply Current vs. Voltage
3. On-Resistance vs. Temperature
4. On-Resistance vs. Voltage
5. Current Limit vs. Temperature
6. Current Limit vs. Voltage
REV1.0
- JUL 2011 RELEASED -
-5-

5 Page





A4770 arduino
AiT Semiconductor Inc.
www.ait-ic.com
A4770
POWER SWITCH
100mΩ POWER DISTRIBUTION
DETAILED INFORMATION
The A4770 is a high-side single N-channel switch with active-high enable input.
Input and Output
VIN (input) is the power supply connection to the circuitry and the drain of the output MOSFET. VOUT (output) is
the source of the output MOSFET. In a typical circuit, current flows through the switch from VIN to VOUT toward
the load. Both VOUT pins must be short on the board and connected to the load and so do both VIN pins but
connected to the power source.
Thermal Shutdown
Thermal shutdown shuts off the output MOSFET if the die temperature exceeds 130°C and 20°C of hysteresis
forces the switch turning off until the die temperature drops to 110°C.
Soft Start
In order to eliminate the upstream voltage droop caused by the large inrush current during hot-plug events,
the “soft-start” feature effectively isolates power supplies from such highly capacitive loads.
Under-voltage Lockout
UVLO prevents the MOSFET switch from turning on until input voltage exceeds 1.8V (typical). If input voltage
drops below 1.8V (typical), UVLO shuts off the MOSFET switch.
Current Limiting and Short Protection
The current limit circuit is designed to protect the system supply, the MOSFET switch and the load from
damage caused by excessive currents. The current limit threshold is set internally to allow a minimum of 1.1A
through the MOSFET but limits the output current to approximately 1.5A typical. When the output is short to
ground, it will limit to a constant current 1A until thermal shutdown or short condition removed.
REV1.0
- JUL 2011 RELEASED -
- 11 -

11 Page







PáginasTotal 15 Páginas
PDF Descargar[ Datasheet A4770.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
A4770POWER SWITCHAiT Semiconductor
AiT Semiconductor
A47711A CURRENT LIMITED LOAD SWITCHAiT Semiconductor
AiT Semiconductor
A4772POWER SWITCHESAiT Semiconductor
AiT Semiconductor
A4773PRECISION LOAD SWITCHAiT Semiconductor
AiT Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar