|
|
Número de pieza | SN3350 | |
Descripción | 40V LED driver | |
Fabricantes | SI-EN Technology | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SN3350 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! SN3350
40V LED driver with internal switch
General Description
The SN3350 is a continuous mode inductive step-down
converter, designed for driving a single LED or multiple
series connected LEDs efficiently from a voltage source
higher than the LED voltage. The chip operates from an
input supply between 6V and 40V and provides an
externally adjustable output current of up to 750mA.
Depending upon supply voltage and external components,
this can provide up to 30 watts of output power.
The SN3350 includes an integrated output switch and a
high-side output current sensing circuit, which uses an
external resistor to set the nominal average output current.
Output current can be adjusted linearly by applying an
external control signal to the ADJ pin. The ADJ pin will
accept either a DC voltage or a PWM waveform. This will
provide either a continuous or a gated output current.
Applying a voltage of 0.2V or lower to the ADJ pin turns
the output off and switches the chip into a low current
standby state.
The chip is assembled in SOT23-5 and SOT89-5 package.
SOT23-5 is available for 350mA output current application;
SOT89-5 is available for 700mA output current application.
Application Circuit
Features
z Simple low parts count
z Internal 40V power switch
z Wide input voltage range: 6V to 40V
z Up to 750mA output current(SOT89-5 package)
z High efficiency (up to 95% )
z Typical 1200:1 dimming rate
z Typical 5% output current accuracy
z Single pin on/off and brightness control using DC
voltage or PWM
z Up to 1MHz switching frequency
z Inherent open-circuit LED protection
z Thermal shutdown protection circuitry
z Two packages available for different current
Applications
z Low voltage halogen replacement LEDs
z Automotive lighting
z Low voltage industrial lighting
z LED back-up lighting
z Illuminated sign
March 2009 Ver1.0
1 SI-EN Technology
1 page SN3350
Electrical characteristics (test conditions: VIN=12V, Tamb=25°C unless otherwise stated) (*)
(continued)
Symbol
ILX(leak)
RLX
Parameter
LX switch leakage current
LX Switch ‘On’ resistance
Conditions
Min.
Typ.
0.9
Max.
1
1.5
Unit
μA
Ω
DPWM(LF)
Brightness control range at low
frequency PWM signal
PWM frequency =100Hz PWM
amplitude=5V,Vin=15V,
L=27uH, Driving 1 LED
1200:1
DPWM(HF)
Brightness control range at low
frequency PWM signal
PWM frequency =10KHz PWM
amplitude=5V,Vin=15V,
L=27uH, Driving 1 LED
13:1
fLX Operating frequency
ADJ pin floating
L=100μH (0.82Ω) IOUT=350mA
@ VLED=3.4V Driving 1 LED
154
KHz
TONmin Minimum switch ‘ON’ time
LX switch ‘ON’
200 ns
TOFFmin
fLXmax
DLX
TPD
Minimum switch ‘OFF’ time
Recommended
maximum
operating frequency
Recommended duty cycle range
of output switch at fLXmax
Internal comparator propagation
delay
LX switch ‘OFF’
200 ns
1 MHz
0.3 0.7 0.9
50 ns
TSD Thermal shutdown temperature
140 °C
TSD-HYS Thermal shutdown hysteresis
20 °C
NOTES:
(*) Production testing of the chip is performed at 25°C. Functional operation of the chip and parameters specified are guaranteed by design,
characterization and process control in other temperature
March 2009 Ver1.0 5 SI-EN Technology
5 Page Package Information
SOT23-5
SN3350
March 2009 Ver1.0 11 SI-EN Technology
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet SN3350.PDF ] |
Número de pieza | Descripción | Fabricantes |
SN3350 | 40V LED driver | SI-EN Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |