|
|
Número de pieza | PT11-21C-L41-TR8 | |
Descripción | 1206 Package Phototransistor | |
Fabricantes | Everlight Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PT11-21C-L41-TR8 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! 1206 Package Phototransistor With Inner Lens
PT11-21C/L41/TR8
Features
․Fast response time
․High photo sensitivity
․Small junction capacitance
․Package in 8mm tape on 7” diameter reel
․Pb free
․The product itself will remain within RoHS compliant version.
Descriptions
․PT11-21C/L41/TR8 is a phototransistor in miniature SMD package
which is molded in a water clear plastic with flat top view lens.
The device is Spectrally matched to visible and infrared emitting
diode.
Applications
․Automatic door sensor
․Copier
․Game machine
․Infrared applied systm
Device Selection Guide
Part Category
Chip
Material
PT Silicon
Lens Color
Water clear
1
Copyright © 2013, Everlight All Rights Reserved. Release Date : 2013/6/18. Issue No: DPT-0000288. Rev:3
www.everlight.com
Revision : 3
LifecyclePhase:
Release Date:2013-07-05 13:50:35.0
Expired Period: Forever
1 page Data Sheet
1206 Package Phototransistor With Inner Lens
PT11-21C/L41/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30 or less and 60%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
5
Copyright © 2013, Everlight All Rights Reserved. Release Date : 2013/6/18. Issue No: DPT-0000288. Rev:3
www.everlight.com
Revision : 3
LifecyclePhase:
Release Date:2013-07-05 13:50:35.0
Expired Period: Forever
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet PT11-21C-L41-TR8.PDF ] |
Número de pieza | Descripción | Fabricantes |
PT11-21C-L41-TR8 | 1206 Package Phototransistor | Everlight Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |