|
|
Número de pieza | PT91-21B-L369-TR10 | |
Descripción | Lead Phototransistor | |
Fabricantes | Everlight Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PT91-21B-L369-TR10 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! 1.9mm Round Subminiature “Gull Wing” Lead Phototransistor
PT91-21B/L369/TR10(GH)
Preliminary
Features
․Fast response time
․High photo sensitivity
․Small junction capacitance
․Compatible with infrared and vapor phase reflow solder process.
․Pb free
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH.
Descriptions
․PT91-21B/L369/TR10(GH) is a phototransistor in miniature SMD package
which is molded in black plastic with spherical top view
lens. The device is spectrally matched to infrared emitting
diode.
Applications
․Miniature switch
․Counters and sorter
․Position sensor
․Infrared applied system
Device Selection Guide
Part Category Chip Material
PT Silicon
Lens Color
Black
R1eviCsoipoynright © :20114, Everlight All Rights Reserved. Release Date : 2014/12/4. Issue No: DPT-0R00e0l4e2a5seReDv:a1 te:2014-12-12 1w1:w4w8:.e5v8e.0rlight.com
LifecyclePhase:
Expired Period: Forever
1 page Data Sheet
1.9mm Round Subminiature “Gull Wing” Lead Phototransistor
PT91-21B/L369/TR10(GH)
Preliminary
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause
big current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 10 ~30 and 90%RH or
less.
2.3 The LEDs suggested be used within one year.
2.4 After opening the package, the devices must be stored at 10°C~30°C and 60%RH,
and used within 168 hours (floor life). If unused LEDs remain, it should be stored in
moisture proof packages.
2.5 If the moisture absorbent material (desiccant material) has faded or unopened bag
has exceeded the shelf life or devices (out of bag) have exceeded the floor life,
baking treatment is required.
2.6 If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure or
recommend the following conditions:
96 hours at 60°C ± 5°C and < 5 % RH (reeled/tubed/loose units)
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
5RevisCioopnyright ©: 21014, Everlight All Rights Reserved. Release Date : 2014/12/4. Issue No: DPTR-00e0l0e4a2s5e RDeva:1te:2014-12-12 11w:4w8w:5.e8v.0erlight.com
LifecyclePhase:
Expired Period: Forever
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet PT91-21B-L369-TR10.PDF ] |
Número de pieza | Descripción | Fabricantes |
PT91-21B-L369-TR10 | Lead Phototransistor | Everlight Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |