|
|
Número de pieza | MP2633 | |
Descripción | 1.5A Single Cell Switch Mode Battery Charger | |
Fabricantes | MPS | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MP2633 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! MP2633
1.5A Single Cell Switch Mode Battery Charger
with Power Path Management and Boost OTG
The Future of Analog IC Technology
DESCRIPTION
The MP2633 is a highly-integrated, flexible,
switch-mode battery charge management and
system power path management device for a
single-cell Li-ion and Li-Polymer battery used in
a wide range of portable applications.
The MP2633 has two operating modes—charge
mode and boost mode—to allow management
of system and battery power based on the state
of the input.
When input power is present, the device
operates in charge mode. It automatically
detects the battery voltage and charges the
battery in the three phases: trickle current,
constant current and constant voltage. Other
features include charge termination and auto-
recharge. This device also integrates both
input-current limit and input-voltage regulation
in order to manage input power and meet the
priority of the system power demand. .
In the absence of an input source, the MP2633
switches to boost mode through the MODE pin
to power the SYS pins from the battery. The
OLIM pin programs the output current limit in
boost mode. The MP2633 also allows an output
short-circuit thanks to an output disconnect
feature, and can auto-recover when the short
circuit fault is removed.
The MP2633 provides full operating status
indication to distinguish charge mode from
boost mode.
The MP2633 achieves low EMI/EMC
performance with well-controlled switching
edges.
To guarantee safe operation, the MP2633 limits
the die temperature to a preset value 120oC.
Other safety features include input over-voltage
protection, battery over-voltage protection,
thermal shutdown, battery temperature
monitoring, and a programmable timer to
prevent prolonged charging of a dead battery.
FEATURES
• 4.5V-to-6V Operating Input Voltage Range
• Power Management Function Integrated
Input-Current Limit and Input-Voltage
Regulation
• Up to 1.5A Programmable Charge Current
• Trickle-Charge Function
• Selectable 3.6V/ 4.2V Charge Voltage with
0.5% Accuracy
• Negative Temperature Coefficient Pin for
Battery Temperature Monitoring
• Programmable Timer Back-Up Protection
• Thermal Regulation and Thermal Shutdown
• Internal Battery Reverse Leakage Blocking
• Reverse Boost Operation Mode for System
Power
• Up to 91% 5V Boost Mode Efficiency @ 1A
• Programmable Output Current Limit for
Boost Mode
• Integrated Short Circuit Protection for Boost
Mode
APPLICATIONS
• Sub-Battery Applications
• Power-Bank Applications for Smart-Phone
Tablet and other Portable Device
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
MP2633 Rev. 1.07
www.MonolithicPower.com
1/23/2014
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
1
1 page MP2633 – 1.5A SINGLE CELL SWITCH MODE BATTERY CHARGER
ELECTRICAL CHARACTERISTICS (continued)
VIN = 5.0V, TA = 25°C, unless otherwise noted.
Parameter
Symbol Condition
Trickle-Charge Voltage
Threshold
VBATT_TC
Connect to VB to GND
Leave VB floating or connect
to high logic
Trickle-Charge Hysteresis
Termination Charge Current
Input-Voltage-Regulation
Reference
IBF
VREG
RS1=40m, RISET=69.8k
Boost Mode
SYS Voltage Range
Feedback Voltage
Feedback Input Current
Boost SYS Over-Voltage
Protection Threshold
VSYS(OVP)
VFB=1V
Threshold over VSYS to turn
off the converter during
boost mode
SYS Over-Voltage Protection
Threshold Hysteresis
VSYS falling from VSYS(OVP)
Boost Quiescent Current
Programmable Boost Output
Current Limit Accuracy
IOLIM
ISYS = 0, MODE = 5V
RS1 = 40mΩ, ROLIM = 100k
Programmable Boost Output
Current(5)
RS1 = 50mΩ, ROLIM=63.4k
SYS Over-Current Blanking
Time(5)
τSYSOCBLK
SYS Over-Current Recovery
Time(5)
τSYSRECVR
Weak-Battery Threshold
VBATT(LOW)
During Boost mode
Before Boost mode
Sleep Mode
Battery Leakage Current
ILEAKAGE
VBATT = 4.2V, SYS Float, VIN
= 0V, MODE = 0V
Indication and Logic
---------------- ------------ -------------------
ACOK, CHG, BOOST pin
output low voltage
Sinking 1.5mA
---------------- ------------ -------------------
ACOK, CHG, BOOST pin
leakage current
Connected to 5V
NTC and Time-Out Fault
Blinking Frequency(5)
CTMR=0.1μF, ICHG=1A
EN Input Logic LOW Voltage
EN Input High Voltage
Mode Input Logic LOW Voltage
Mode Input Logic HIGH Voltage
Min
2.47
2.9
2.5%
1.18
4.2
1.18
5.8
1
1.5
1.4
1.4
Typ
2.57
3
200
10%
1.2
Max Units
2.67
3.1
V
17.5%
mV
ICC
1.22 V
6V
1.2 1.22
V
200 nA
6 6.2 V
125 mV
1.4 mA
1.2 1.44
A
A
120 µs
1 ms
2.5
2.9 3.05
V
V
15 30 μA
400 mV
13.7
1
0.4
0.4
μA
Hz
V
V
V
V
MP2633 Rev. 1.07
www.MonolithicPower.com
1/23/2014
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
5
5 Page MP2633 – 1.5A SINGLE CELL SWITCH MODE BATTERY CHARGER
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=5V, CIN=CBATT=CSYS=C3=22µF, C1=C2=1µF, L1=2.2µH, RS1=50mΩ, C4=CTMR=0.1µF, Battery
Simulator, unless otherwise noted.
SYS short Entry
Boost Mode
VSYS_SET=5V, VBATT=3.7V
SYS Short Recovery
Boost Mode
VSYS_SET=5V, VBATT=3.7V
SYS Over Voltage Protection,
Boost Mode
VSYS_SET=6.5V, VBATT=3.7V
VBATT
2V/div.
VSYS
2V/div.
IL
1A/div.
VBATT
2V/div.
VSYS
2V/div.
IL
1A/div.
VBATT
2V/div.
VSYS
2V/div.
BOOST
2V/div.
SYS Load Transient,
Boost Mode
VSYS_SET=5V, VBATT=3.7V,
ISYS= 100mA to 1A
SYS Load Transient,
Boost Mode
VSYS_SET=5V, VBATT=3.7V,
ISYS= 500mA to 1A
SYS Short Steady State
Boost Mode
VSYS_SET=5V, VBATT=3.7V
VSYS/AC
200mV/div.
VBATT
1V/div.
ISYS
500mA/div.
VSYS/AC
200mV/div.
VBATT
1V/div.
ISYS
500mA/div.
VBATT
2V/div.
VSYS
2V/div.
IL
1A/div.
Efficiency, Boost Mode
VSYS_SET=5V, VSYS=5V,
FSW=1.2MHz
100
90
80
VBATT=4.2V VBATT=3.7V
VBATT=2.9V
70
60
50
40
30
0 0.25 0.5 0.75 1
SYSTEM CURRENT (A)
Efficiency, Boost Mode
VSYS_SET=5V, VSYS=5V,
FSW=600kHz
100
90
80
VBATT=4.2V VBATT=3.7V
VBATT=2.9V
70
60
50
40
30
0 0.25 0.5 0.75 1
SYSTEM CURRENT (A)
Boost Output V-I Curve
BATT=3.7V, SYS=5V
6
5
4
3
2
1
0
0 0.5
1 1.5
SYSTEM CURRENT (A)
MP2633 Rev. 1.07
www.MonolithicPower.com
1/23/2014
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet MP2633.PDF ] |
Número de pieza | Descripción | Fabricantes |
MP2633 | 1.5A Single Cell Switch Mode Battery Charger | MPS |
MP2635 | 2A Single Cell Switch Mode Battery Charger | MPS |
MP2637 | 2.5A Single Cell Switch Mode Battery Charger | MPS |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |