|
|
Número de pieza | CD5030 | |
Descripción | CD/USB Multi-Source Receiver User Manual | |
Fabricantes | ECLIPSE | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CD5030 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Owner's Manual / Manual del propietario / Manuel de I'utilisateur
CD5030
CD/USB Multi-Source Receiver / Built-in A2DP Bluetooth
wireless technology
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Tras adquirir este receptor rogamos lea atentamente su
manual para una correcta utilización del equipo.
Igualmente, guarde dicho manual en un lugar adecuado para poder
recurrir a él en caso de futuras consultas.
Nous vous remercions d'avoir acheté ce récepteur.
Veuillez lire ce manuel afin d'utiliser votre appareil correctement.
Nous vous recommandons de conserver ce manuel
dans un endroit sûr afin de pouvoir le consulter ultérieurement.
1 page For your safety in using the CD5030
12 CAUTION
● When inserting batteries into the equipment or devices, be careful with the polarity
(positive/negative), and insert them as indicated. If the battery polarities are incorrect,
injuries and pollution to the surroundings may result from battery ruptures and leakage.
● Replace used batteries as soon as possible; they may leak and damage the remote control.
Battery leakage can damage equipment or devices, or burn your skin or your eyes. Wash
hands after handling.
● If alkaline solution from alkaline dry batteries makes contact with your skin or clothes,
flush with clean water. If any of the solution gets in your eyes, also flush clean with water
and then seek medical attention.
● When disposing of lithium dry cell batteries, affix insulating tape to the positive and
negative terminals of the batteries, and after they are insulated, dispose of them according
to the "Local municipal ordinances". Short circuiting, fire or ruptures may result from
improper disposal if batteries come contact with other electrically conductive objects such
as metal parts, etc.
● Do not short, disassemble or heat the batteries, or place them in fire or water. Fire and
injuries may result from battery rupture and leakage.
● Store the remote control in a place away from direct sunlight, high temperatures, and high
moisture levels. The outer case may change shape, and the batteries may rupture and leak.
● Do not use this main unit except for in-vehicle use. Shocks or injuries may result.
● Be careful of the position of the volume when turning the power source ON. Hearing
damage may result if very loud noise is emitted when the power is turned ON.
● Do not operate under abnormal conditions such as when the sound is broken or distorted.
Fires may result.
● This main unit uses invisible laser light. Do not disassemble or alter this main unit. If
trouble occurs, contact the dealer where you bought the main unit. Altering this main unit
may cause exposure to laser emissions (worsening eyesight), or result in accidents, fires
or shocks.
● If the main unit is dropped or the cosmetics appear broken, turn off the power to the main
unit and contact your dealer. If used in this condition, fires or shocks may result.
I
5
5 Page Table of Contents
How to operate the Sound Adjustment Mode ................................... 64
About Sound Adjustment Mode.................................................................................... 64
About parametric EQ.............................................................................................. 65
About time alignment ............................................................................................. 66
About crossover ..................................................................................................... 66
Switching the sound adjustment mode......................................................................... 68
Parametric equalizer adjustment (PEQ) ....................................................................... 68
Manually adjusting the equalizer mode .................................................................. 69
Selecting an equalizer mode from memory .................................................................. 69
Resetting the Equalizer mode ...................................................................................... 69
Automatically adjusting the equalizer mode (Auto EQ) ................................................ 70
Measuring frequency characteristics...................................................................... 70
Changing the equalizer mode (Auto EQ) based on the measurement result ............... 71
Time alignment adjustment (Time Alignment) .............................................................. 71
Manually adjusting Time Alignment ....................................................................... 71
Automatically adjusting Time Alignment (Auto TA) ................................................ 72
Position selector ........................................................................................................... 73
Crossover adjustment (X-Over) .................................................................................... 73
Multi-harmonizer settings (Harmonizer) ....................................................................... 74
Non-fader settings (Non-F Setting)............................................................................... 74
Non-Fader Output settings (Output)....................................................................... 74
Non-fader phase settings (Phase) ......................................................................... 74
Making changes with Display Adjustment Mode .............................. 75
Switching the Display Adjustment Mode ...................................................................... 75
Switching the brightness (Bright).................................................................................. 75
Changing illumination color .......................................................................................... 76
Changing display type (DISP Type) ............................................................................. 76
Changing Background (Background) ........................................................................... 76
Changing spectrum analyzer (S/A)............................................................................... 76
Changing the scroll type (Scroll Type).......................................................................... 77
Importing display data (DISP Data) .............................................................................. 77
Making changes with Function Mode ................................................ 79
Switching the Function Mode ....................................................................................... 79
Setting the guide tone................................................................................................... 79
Setting clock display (Clock ON/OFF) .......................................................................... 79
Setting time (Clock Adjust) ........................................................................................... 80
Switching demonstration screen display (Demo) ......................................................... 80
Setting spectrum analyzer sensitivity (S/A Sensitivity) ................................................. 81
Setting the steering remote function (U.S.A. only) ....................................................... 81
Automatic setup of steering remote functions (U.S.A. only)................................... 82
Manual setup of steering remote functions (U.S.A. only) ....................................... 83
Compatibility with various switches ........................................................................ 85
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet CD5030.PDF ] |
Número de pieza | Descripción | Fabricantes |
CD5030 | CD/USB Multi-Source Receiver User Manual | ECLIPSE |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |