|
|
PDF TSL260R Data sheet ( Hoja de datos )
| Número de pieza | TSL260R | |
| Descripción | INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS | |
| Fabricantes | TAOS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TSL260R (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
r TSL260R, TSL261R, TSL262R
INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS
r TAOS049E −SEPTEMBER 2007
D Integral Visible Light Cutoff Filter
D Monolithic Silicon IC Containing
Photodiode, Operational Amplifier, and
Feedback Components
D Converts Light Intensity to a Voltage
D High Irradiance Responsivity, Typically
111 mV/(mW/cm2) at lp = 940 nm (TSL260R)
D Compact 3-Lead Plastic Package
D Single Voltage Supply Operation
D Low Dark (Offset) Voltage....10mV Max
D Low Supply Current......1.1 mA Typical
D Wide Supply-Voltage Range.... 2.7 V to 5.5 V
D Replacements for TSL260, TSL261, and
TSL262
D RoHS Compliant (−LF Package Only)
PACKAGE S
SIDELOOKER
(FRONT VIEW)
PACKAGE SM
SURFACE MOUNT
SIDELOOKER
(FRONT VIEW)
123
GND VDD OUT
Description
123
GND VDD OUT
The TSL260R, TSL261R, and TSL262R are infrared light-to-voltage optical sensors, each combining a
photodiode and a transimpedance amplifier (feedback resistor = 16 MΩ, 8 MΩ, and 2.8 MΩ respectively) on a
single monolithic IC. Output voltage is directly proportional to the light intensity (irradiance) on the photodiode.
These devices have improved amplifier offset-voltage stability and low power consumption and are supplied
in a 3-lead plastic sidelooker package with an integral visible light cutoff filter and lens. When supplied in the
lead (Pb) free package, the device is RoHS compliant.
Functional Block Diagram
− Voltage
+ Output
Available Options
DEVICE
TSL260R
TSL260R
TSL260R
TSL261R
TSL261R
TSL261R
TSL262R
TSL262R
TSL262R
TA
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
PACKAGE − LEADS
3-lead Sidelooker
3-lead Sidelooker — Lead (Pb) Free
3-lead Surface-Mount Sidelooker — Lead (Pb) Free
3-lead Sidelooker
3-lead Sidelooker — Lead (Pb) Free
3-lead Surface-Mount Sidelooker — Lead (Pb) Free
3-lead Sidelooker
3-lead Sidelooker — Lead (Pb) Free
3-lead Surface-Mount Sidelooker — Lead (Pb) Free
PACKAGE DESIGNATOR
S
S
SM
S
S
SM
S
S
SM
ORDERING NUMBER
TSL260R
TSL260R−LF
TSL260RSM−LF
TSL261R
TSL261R−LF
TSL261RSM−LF
TSL262R
TSL262R−LF
TSL262RSM−LF
The
LUMENOLOGY
r
Company
Texas
Advarnced
Optoelectronic
Solutions
Inc.
1001 Klein Road S Suite 300 S Plano, TX 75074 S (972r) 673-0759
www.taosinc.com
Copyright E 2007, TAOS Inc.
1
1 page  
TSL260R, TSL261R, TSL262R
INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS
TYPICAL CHARACTERISTICS
TAOS049E −SEPTEMBER 2007
OUTPUT VOLTAGE
vs
IRRADIANCE
10 VDD = 5 V
λp = 940 nm
RL = 10 kW
TA = 25°C
TSL261R
TSL260R
1
PHOTODIODE SPECTRAL RESPONSIVITY
1
TA = 25°C
0.8
0.6
TSL262R
0.1
0.01
0.1
1 10 100
Ee — Irradiance — mW/cm2
Figure 3
1000
MAXIMUM OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
5
RL = 10 kΩ
TA = 25°C
4
0.4
0.2
0
600
700 800 900 1000
λ − Wavelength − nm
Figure 4
SUPPLY CURRENT
vs
OUTPUT VOLTAGE
1.6
VDD = 5 V
RL = 10 kW
TA = 25°C
1.4
1100
3 1.2
21
1
0
2.5 3 3.5 4 4.5 5
VDD − Supply Voltage − V
Figure 5
5.5
0.8
0.6
0
12 3
VO − Output Voltage − V
Figure 6
4
The LUMENOLOGY r Company
r
www.taosinc.com
r
Copyright E 2007, TAOS Inc.
5
5 Page 
TSL260R, TSL261R, TSL262R
INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS
MECHANICAL DATA
TAOS049E −SEPTEMBER 2007
The TSL260R, TSL261R, and TSL262R are supplied in a clear 3-lead through-hole package with a molded lens. The
integrated photodiode active area is typically 1,0 mm2 (0.0016 in2) for TSL260R, 0,5 mm2 (0.00078 in2) for the
TSL261R, and 0,26 mm2 (0.0004 in2) for the TSL262R.
PACKAGE S
PLASTIC SINGLE-IN-LINE SIDE-LOOKER PACKAGE
TOP VIEW
4.60
2.60 R 0.90
1.64
FRONT VIEW
2.30 1.80
1
0.42
SIDE VIEW
0.15
Note B
4.60
1.56
14.86 + 0.50
Pb
2y2
0.47 TYP
Lead Free
Available
0.42
NOTES: A. All linear dimensions are in millimeters; tolerance is ± 0.25 mm unless otherwise stated.
B. Dimension is to center of lens arc, which is located below the package face.
C. The integrated photodiode active area is typically located in the center of the lens and 0.97 mm below the top of the lens surface.
D. Index of refraction of clear plastic is 1.55.
E. Lead finish for TSL26xR: solder dipped, 63% Sn/37% Pb. Lead finish for TSL26xR−LF: solder dipped, 100% Sn.
F. This drawing is subject to change without notice.
Figure 14. Package S — Single-In-Line Side-Looker Package Configuration
The LUMENOLOGY r Company
r
Copyright E 2007, TAOS Inc.
www.taosinc.com
r
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet TSL260R.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TSL260 | IR LIGHTTOVOLTAGE OPTICAL SENSORS |  ETC |
| TSL260 | IR Light-to-Voltage Optical Sensors (Rev. A) |  Texas Instruments |
| TSL260R | INFRARED LIGHT-TO-VOLTAGE OPTICAL SENSORS | TAOS |
| TSL260RD | LIGHT-TO-VOLTAGE OPTICAL SENSORS | TAOS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |