|
|
PDF M236H1-L08 Data sheet ( Hoja de datos )
| Número de pieza | M236H1-L08 | |
| Descripción | TFT LCD Module | |
| Fabricantes | CHI MEI | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de M236H1-L08 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: 04. Jan, 2010
Model No.: M236H1-L08
Approval
TFT LCD Approval Specification
MODEL NO.: M236H1- L08
Customer:
Approved by:
Sony (Foxconn)
Note:
ுழၴ
ຝ॰
2010-06-10
10:51:04
MTR
ขጥ
ᐉு
ߡۥ ދป
2010.06.10
Director Accept
1 / 31
Version 3.2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
1 page  
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: 04. Jan, 2010
Model No.: M236H1-L08
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
M236H1-L08 is a 23.6” TFT Liquid Crystal Display module with 4 CCFL Backlight unit and 30 pins
2ch-LVDS interface. This module supports 1920 x 1080 Full HD mode and can display up to 16.7M colors.
The inverter module for Backlight is not built in.
1.2 FEATURES
- Extra-wide viewing angle.
- High contrast ratio.
- Fast response time.
- High color saturation.
- Full HD (1920 x 1080 pixels) resolution.
- DE (Data Enable) only mode.
- LVDS (Low Voltage Differential Signaling) interface.
- RoHS compliance.
- TCO03 compliance
- Aspect ratio: 16:9
1.3 APPLICATION
- TFT LCD Monitor
1.4 GENERAL SPECIFICATI0NS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Transmissive Mode
Surface Treatment
Module Power Consumption
Specification
521.28(H) x 293.22(V) (23.547” real diagonal)
525.22 (H) x 297.22 (V)
a-Si TFT active matrix
1920 x R.G.B. x 1080
0.2715 (H) x 0.2715 (V)
RGB vertical stripe
16.7M
Normally White
AG type, 3H hard coating, Haze 25
31.54
Unit
mm
mm
-
pixel
mm
-
color
-
-
Watt
Note
(1)
-
-
-
-
-
-
-
(2)
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal(H)
Module Size Vertical(V)
Depth(D)
Weight
Min.
544.3
320.0
18.2
-
Typ.
544.8
320.5
18.7
2900
Max.
545.3
321.0
19.2
2950
Unit Note
mm
mm (1)
mm
g-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Please refer to sec.3.1 & 3.2 for more information of power consumption
5 / 31
Version 3.2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
5 Page 
Global LCD Panel Exchange Center
www.panelook.com
Issued Date: 04. Jan, 2010
Model No.: M236H1-L08
Approval
3.2 BACKLIGHT UNIT
Parameter
Symbol
Lamp Input Voltage
Lamp Current
Lamp Turn On Voltage
Operating Frequency
Lamp Life Time
Power Consumption
VL
IL
VS
FL
LBL
PL
Min.
3.0
40
50,000
Value
Typ.
930
7.0
26.04
Ta = 25 ± 2 ºC
Max.
1023
8.0
1630 (0к)
1480 (25к)
80
Unit
VRMS
mARMS
VRMS
VRMS
KHz
Hrs
W
Note
IL = 7.0 mA
(1)
(2)
(2)
(3)
(5), IL = 7.0mA
(4), IL = 7.0 mA
Note (1) Lamp current is measured by current amplify & oscilloscope as shown below:
LCD
Module
HV (Pink)
LV (White)
1
2
HV (Blue)
LV (Black)
Current
Probe
1
2
A
A
Inverter
Current
Amplify Oscilloscope
Ta = 25 ± 2 ºC
Measure equipment:
Current Amplify: Tektronix TCPA300
Current probe: Tektronix TCP312
Oscilloscope: TDS3054B
Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second
after startup. Otherwise, the lamp may not be turned on normally. It is the value output voltage of
NF circuit.
Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the
display, which might cause line flow on the display. In order to avoid interference, the lamp
frequency should be detached from the horizontal synchronization frequency and its harmonics as
far as possible.
Note (4) PL = IL ͪ VL ͪ 4 (for 4lamps)
Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition
Ta = 25 ̈́2 oC and IL = 7.0 mArms until one of the following events occurs:
(a) When the brightness becomes Љ 50% of its original value.
(b) When the effective ignition length becomes Љ 80% of its original value.
(The effective ignition length is a scope that luminance is over 80% of that at the
center point.)
Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight,
11 / 31
Version 3.2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet M236H1-L08.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| M236H1-L01 | TFT LCD Module | CHI MEI |
| M236H1-L03 | TFT LCD Module | CHI MEI |
| M236H1-L07 | TFT LCD Module | CHI MEI |
| M236H1-L08 | TFT LCD Module | CHI MEI |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |