DataSheet.es    


PDF SM8100 Data sheet ( Hoja de datos )

Número de pieza SM8100
Descripción Magnetic-inductive flow sensor Operating instructions
Fabricantes ifm 
Logotipo ifm Logotipo



Hay una vista previa y un enlace de descarga de SM8100 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! SM8100 Hoja de datos, Descripción, Manual

Operating instructions
Magnetic-inductive flow sensor
SM8100
UK

1 page




SM8100 pdf
3  Functions and features
The unit monitors liquids.
It detects the 3 process categories volumetric flow, consumed quantity, medium
temperature.
Application area
Conductive liquids with the following properties:
• conductivity: ≥ 20 µS/cm
viscosity: < 70 mm2/s at 40 °C
4  Function
UK
4.1  Processing of the measured signals
The unit displays the current process values.
It generates 2 output signals according to the parameter setting.
OUT1: 3 selection options........................................................... parameter setting
switching signal for volumetric flow limit values ....................................... (→ 9.2.1)
or pulse sequence for totalising meter ..................................................... (→ 9.3.1)
or switching signal for preset counter ....................................................... (→ 9.3.2)
OUT2: 4 selection options
switching signal for volumetric flow limit value ......................................... (→ 9.2.2)
or switching signal for temperature limit value ......................................... (→ 9.4.1)
or analogue signal for volumetric flow ...................................................... (→ 9.2.3)
or analogue signal for temperature .......................................................... (→ 9.4.2)
OUT2 (pin 2) cannot only be used as an output
but also as an input for an external reset signal: ...................................... (→ 9.3.5)
4.2  Volumetric flow monitoring
The medium flows through a magnetic field. It generates a signal voltage which is
directly proportional to the volumetric flow.
2 switching signals for volumetric flow limit values can be provided (output 1
and output 2). For the switching functions → 4.5.
An analogue signal proportional to the volumetric flow (4...20 mA or 0...10 V)
can be provided on output 2. For the analogue functions → 4.6.
In addition to the flow velocity, the unit also detects the flow direction. The positive
flow direction is marked on the unit by an arrow (“flow direction” → 5.2).
5

5 Page





SM8100 arduino
Example: dSt for window function
� �� � � � �
��
��
����
���
��
���
���
UK
���
1 Volumetric flow quantity Q reaches 0.5% of VMR → dSt starts, output becomes active.
2 dSt elapsed, Q reached good range → output remains active.
3 Q above SP (leaves good range) → output is reset.
4 Q again below SP → output becomes active again.
5 Q below rP (leaves good range) → output is reset again.
6 Q reaches again 0.5 % of VMR → dSt starts, output becomes active.
7 dSt elapsed, Q has not reached good range → output is reset.
8 Q reaches good range, output becomes active.
5  Installation
5.1  Installation location
►Install the unit so that the measuring pipe is always completely filled.
►Arrange for inlet and outlet pipe lengths. Disturbances caused by bends,
valves, reductions, etc. are compensated for. It applies in particular: no shut-off
and control devices are allowed directly in front of the unit.
�����
�����
��������������
��������������
S = disturbance; D = pipe diameter; F = flow direction
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet SM8100.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SM8100AC / DC PWM ControllerLinkage
Linkage
SM8100Flow sensorsifm
ifm
SM8100Magnetic-inductive flow sensor Operating instructionsifm
ifm
SM8100B8.0 AMP Surface Mount Schottky Barrier RectifiersSeCoS
SeCoS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar