|
|
Número de pieza | AMMC-5033 | |
Descripción | 17.7 - 32 GHz Power Amplifier | |
Fabricantes | AVAGO | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AMMC-5033 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! AMMC-5033
17.7 - 32 GHz Power Amplifier
Data Sheet
Chip Size: 2730 x 1300 µm (108 x 51.6 mils)
Chip Size Tolerance: ± 10 µm (±0.4 mils)
Chip Thickness: 100 ± 10 µm (4 ± 0.4 mils)
Pad Dimensions: 80 x 80 µm (2.95 ± 0.4 mils)
Description
Avago’s AMMC-5033 is a MMIC power amplifier designed
for use in wireless transmitters that operate within
17.7 GHz to 32 GHz range. At 25 GHz, it provides 27 dBm
of output power (P-1dB) and 20 dB of small- signal gain
from a small easy-to-use device. The device has input
and output matching circuitry for use in 50 Ω environ-
ments. The AMMC- 5033 also integrates a temperature
compensated RF power detection circuit that enables
power detection of 0.1 V/W at 22 GHz. For improved
reliability and moisture protection, the die is passivated
at the active areas.
AMMC-5033 Absolute Maximum Ratings[1]
Symbol Parameters/Conditions
Units Min. Max.
Vd1,2
Vg1, Vgg
Det Bias
Positive Drain Voltage
Gate Supply Voltage
Applied Detector Bias
(Optional)
V
V -3
V
7
0.5
7
Id1
Id2
Pin
Tch
Tstg
Tmax
First Stage Drain Current
Second Stage Drain Current
CW Input Power
Operating Channel Temp.
Storage Case Temp.
Maximum Assembly Temp.
(60 sec max)
mA 320
mA 640
dBm 23
°C +150
°C -65 +150
°C +300
Features
• Wide frequency range: 17.7 – 32 GHz
• High power: P-1dB @ 25 GHz = 27 dBm
• High gain: 20 dB
• Return loss: Input: -13 dB, Output: –20 dB
• Integrated RF power detector
Applications
• Designed for use in transmitters that operate in various
frequency bands between 17.7 GHz and 32 GHz.
• Can be driven by the AMMC-5040 (20-40 GHz) or the
AMMC-5618 (6-20 GHz) MMIC amplifiers, increasing
the power handling capability of transmitters requiring
linear operation.
Note:
1. Operation in excess of any one of these conditions may result
in permanent damage to this device.
Note: These devices are ESD sensitive. The following precautions are strongly recommended:
Ensure that an ESD approved carrier is used when dice are transported from one destination to another.
Personal grounding is to be worn at all times when handling these devices.
1 page 30
28
26
24
22 85 C
25 C
-40 C
20
17 19 21 23 25 27 29 31 33
FREQUENCY (GHz)
Figure 10. Output power at 1 dB gain compression
and temperature
50
40
30
20
10
0
-10 85 C
-20
25 C
-40 C
-30
17 19 21 23 25 27 29 31 33
FREQUENCY (GHz)
Figure 12. Gain with temperature
30
Pout
25
PAE
Id
20
1200
1000
800
15 600
10 400
5 200
0
-30 -20
-10 0
Pin (dBm)
0
10 20
Figure 11. Output power, PAE, and total drain. Current
vs. input power at 25 GHz
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet AMMC-5033.PDF ] |
Número de pieza | Descripción | Fabricantes |
AMMC-5033 | 17.7 - 32 GHz Power Amplifier | AVAGO |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |