|
|
PDF MST6E16GS Data sheet ( Hoja de datos )
| Número de pieza | MST6E16GS | |
| Descripción | LCD TV Service Manual | |
| Fabricantes | Hisense | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MST6E16GS (archivo pdf) en la parte inferior de esta página. Total 53 Páginas | ||
|
No Preview Available !
Liquid Crystal Display Television
Service Manual
Chassis： MST6E16GS
Product Type：LCD26V88AM
LCD32V88AM
Ver 1.0
Hisense Electric Co.，Ltd.
April, 2009
1 page  
LCD TV Service Manual
immediately turn off the power. Continuing to use the product, it may cause fire or
electric shock.
(6) Do not disconnect or connect the connector while power to the product is on. It
takes some time for the voltage to drop to a sufficiently low level after the power
has been turned off. Confirm that the voltage has dropped to a safe level before
disconnecting or connecting the connector.
(7) Do not pull out or insert the power cable from/to an outlet with wet hands. It
may cause electric shock.
(8) Do not damage or modify the power cable. It may cause fire or electric shock.
(9) If the power cable is damaged, or if the connector is loose, do not use the
product: otherwise, this can lead to fire or electric shock.
(10) If the power connector or the connector of the power cable becomes dirty or
dusty, wipe it with a dry cloth. Otherwise, this can lead to fire.
(11) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
1.2 NOTES
Notes on Safe Handling of the LCD panel and during service
The work procedures shown with the Note indication are important for ensuring the
safety of the product and the servicing work. Be sure to follow these instructions.
• Before starting the work, secure a sufficient working space.
• At all times other than when adjusting and checking the product, be sure to turn
OFF the POWER Button and disconnect the power cable from the power source of
the TV during servicing.
• To prevent electric shock and breakage of PC board, start the servicing work at least
30 seconds after the main power has been turned off. Especially when installing and
removing the power board, start servicing at least 2 minutes after the main power has
been turned off.
• While the main power is on, do not touch any parts or circuits other than the ones
specified. If any connection other than the one specified is made between the
measuring equipment and the high voltage power supply block, it can result in
electric shock or activation of the leakage-detection circuit breaker.
• When installing the LCD module in, and removing it from the packing carton, be
sure to have at least two persons perform the work.
• When the surface of the panel comes into contact with the cushioning materials, be
sure to confirm that there is no foreign matter on top of the cushioning materials
before the surface of the panel comes into contact with the cushioning materials.
Failure to observe this precaution may result in, the surface of the panel being
scratched by foreign matter.
Hisense Confidential
5
5 Page 
LCD TV Service Manual
(1) Main Board
(2) Power Board
(3) Keypad PCA
(4) IR Board
（5 Led Board
）
LCD32V88AM
No Description
121044
118984
121048
120680
119914
RSAG2.908.1525-1\ROH RSAG7.820.1702\VER.D\ROH
RSAG2.908.1498\ROH RSAG7.820.1646\VER.C\ROH
RSAG2.908.1573-4\ROH RSAG7.820.1755\VER.A\ROH
RSAG2.908.1551-2\ROH RSAG7.820.1733\VER.B\ROH
RSAG2.908.1552\ROH RSAG7.820.1732\VER.A\ROH
Part No.
Type/Model
PCB/ Model
(1) Main board
(2) Power board
(3) Keypad
(4) IR board
（5 Led Board
）
121044
117562
121048
121225
120110
RSAG2.908.1525-1\ROH RSAG7.820.1702\VER.D\ROH
RSAG2.908.1285-1\ROH RSAG7.820.1377\VER.B\ROH
RSAG2.908.1573-4\ROH RSAG7.820.1755\VER.A\ROH
RSAG2.908.1566-3\ROH RSAG7.820.1725\VER.C\ROH
RSAG2.908.1534-2\ROH RSAG7.820.1699\VER.B\ROH
5. Factory/Service OSD Menu and Adjustment
5.1 To enter the Factory OSD Menu
a. With factory RC (remote control)
1. Press “M” button and enter factory mode.
2. Press “Menu” button and enter factory OSD menu.
3 . Press “CH+”/“CH-” button select the function menu, press “VOL+”/“VOL-” enter the selected
function menu. Press “VOL+”/“VOL-” button adjust values in the menu.
4. Press “M” button exit factory mode in the factory OSD menu.
Hisense Confidential
11
11 Page | ||
| Páginas | Total 53 Páginas | |
| PDF Descargar | [ Datasheet MST6E16GS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MST6E16GS | LCD TV Service Manual | Hisense |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |