|
|
PDF MP522ST Data sheet ( Hoja de datos )
| Número de pieza | MP522ST | |
| Descripción | Digital Projector User Manua | |
| Fabricantes | BenQ | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MP522ST (archivo pdf) en la parte inferior de esta página. Total 62 Páginas | ||
|
No Preview Available !
MP512 ST/MP522 ST
Digital Projector
User Manual
Welcome
1 page  
Safety Instructions (Continued)
13. Do not place this projector in any of 14. Do not block the ventilation holes.
the following environments.
- Space that is poorly ventilated or
confined. Allow at least 50 cm clearance
from walls and free flow of air around the
projector.
- Locations where temperatures may
become excessively high, such as the
inside of a car with all windows rolled up.
- Do not place this projector on a blanket,
bedding or any other soft surface.
- Do not cover this projector with a cloth or
any other item.
- Do not place inflammables near the
projector.
- Locations where excessive humidity, dust,
or cigarette smoke may contaminate
optical components, shortening the
projector's life span and darkening the
image.
If the ventilation holes are seriously
obstructed, overheating inside the
projector may result in a fire.
15. Always place the projector on a level,
horizontal surface during operation.
- Do not use if tilted at an angle of more
than 10 degrees left to right, nor at angle
of more than 15 degrees front to back.
Using the projector when it is not fully
horizontal may cause a malfunction of, or
damage to, the lamp.
- Locations near fire alarms
- Locations with an ambient temperature
above 40°C / 104°F
- Locations where the altitudes are higher
than 3000 m (10000 feet).
3000 m
(10000 feet)
16. Do not stand the projector on end
vertically. Doing so may cause the
projector to fall over, causing injury or
resulting in damage to the projector.
0m
(0 feet)
Important safety instructions 5
5 Page 
Remote control
7.
6
17
28
3 9 8.
4 10
11
7
5 12 9.
13
1. II Power
Toggles the projector between standby
mode and on. See "Starting up the
projector" on page 24 and "Shutting down 10.
the projector" on page 40 for details.
2. Freeze
Freezes the projected image. See "Freezing
the image" on page 38 for details.
11.
3. Left/
Starts the FAQ function. See "Utilizing
FAQ function" on page 38 for details.
4. BLANK
Used to hide the screen picture. See
"Hiding the image" on page 37 for details.
5. Digital Zoom keys (+, -)
Magnifies or reduces the projected picture 12.
size. See "Magnifying and searching for
details" on page 30 for details.
6. Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu, 13.
exits and saves menu settings.
See "Using the menus" on page 25 for
details.
Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30 for
details.
AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 29 for
details.
Right/
Activates panel key lock. See "Locking
control keys" on page 38 for details.
When the On-Screen Display (OSD)
menu is activated, the #3, #7 and #9 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See "Using the menus" on
page 25 for details.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 28 for
details.
Mode/Enter
Depending upon which input signal is
selected, selects an available picture setup
mode. See "Selecting a picture mode" on
page 32 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 25 for details.
Timer On
Activates or displays an on-screen timer
based on your own timer setting. See
"Setting the presentation timer" on page
36 for details.
Timer Setup
Enters presentation timer setting directly.
See "Setting the presentation timer" on
page 36 for details.
Introduction 11
11 Page | ||
| Páginas | Total 62 Páginas | |
| PDF Descargar | [ Datasheet MP522ST.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MP522ST | Digital Projector User Manua | BenQ |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |