|
|
PDF PIC1004H-6R8MF Data sheet ( Hoja de datos )
| Número de pieza | PIC1004H-6R8MF | |
| Descripción | SMD POWER CHOKE COIL | |
| Fabricantes | SUPERWORLD ELECTRONICS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PIC1004H-6R8MF (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
SMD POWER CHOKE COIL
PIC1004H SERIES
1. PART NO. EXPRESSION :
PIC1004H-R36MF
(a) (b) (c) (d) (e)(f)
(a) Series code
(b) Dimension code
(c) Type code
2. CONFIGURATION & DIMENSIONS :
AC
3R3
D
(d) Inductance code : R36 = 0.36uH
(e) Tolerance code : M = ±20%
(f) F : RoHS Compliant
F
ABCDE
11.0±0.5 10.0±0.3 3.8±0.2 2.3±0.3 3.0±0.3
Unit:m/m
F
0~2.5
3. SCHEMATIC :
4. MATERIALS :
a (a) Core : Magnetic metal powder or equivalent
b (b) Wire : Polyester wire or equivalent
(c) Solder Plating : 100% Pb free solder
c
5. GENERAL SPECIFICATION :
a) Test Freq. : L : 100KHz/1V
b) Ambient Temp. : 25°C
c) Operating Temp. : -40°C to +125°C
d) Storage Temp. : -40°C to +125°C
e) Humidity Range : 50 ~ 60% RH (Product without taping)
f) Heat Rated Current (Irms) : Will cause the coil temp. rise approximately ǻt of 40°C (keep 1min.)
g) Saturation Current (Isat) : Will cause L0 to drop <20% (keep quickly)
h) Part Temperature (Ambient+Temp. Rise) : Should not exceed 125°C under worst case operating conditions.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
23.04.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
1 page  
SMD POWER CHOKE COIL
9. SOLDERING AND MOUNTING :
9-1. Recommended PC Board Pattern
13.6
5.4
PIC1004H SERIES
9-2. Soldering
Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused
by the difference in coefficients of expansion between solder, chip and substrate. Our terminations are suitable for all
wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot
air soldering tools.
9-2.1 Solder Re-flow :
Recommended temperature profiles for re-flow soldering in Figure 1.
9-2.2 Soldering Iron (Figure 2) :
Products attachment with soldering iron is discouraged due to the inherent process control limitations.
In the event that a soldering iron must be employed the following precautions are recommended.
Note :
a) Preheat circuit and products to 150°C.
b) 355°C tip temperature (max)
c) Never contact the ceramic with the iron tip
d) 1.0mm tip diameter (max)
e) Use a 20 watt soldering iron with tip diameter of 1.0mm
f) Limit soldering time to 4-5 secs.
Preheating
TP(260°C/40s max.)
Soldering
20~40s
Natural
cooling
217
200
150
25
60~150s
60~180s
480s max.
Time(sec.)
Figure 1. Re-flow Soldering
Preheating
350
Soldering Natural
cooling
150
Over 1min.
Gradual
Cooling
Within 4-5s
Figure 2. Iron Soldering
NOTE : Specifications subject to change without notice. Please check our website for latest information.
23.04.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet PIC1004H-6R8MF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PIC1004H-6R8MF | SMD POWER CHOKE COIL | SUPERWORLD ELECTRONICS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |