|
|
PDF PIC24EP512GP806 Data sheet ( Hoja de datos )
| Número de pieza | PIC24EP512GP806 | |
| Descripción | 16-bit Microcontrollers and Digital Signal Controllers | |
| Fabricantes | Microchip | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PIC24EP512GP806 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
dsPIC33EPXXX(GP/MC/MU)806/810/814
and PIC24EPXXX(GP/GU)810/814
16-bit Microcontrollers and Digital Signal Controllers (up to 512 KB Flash
and 52 KB SRAM) with High-Speed PWM, USB, and Advanced Analog
Operating Conditions
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS
• 3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
Core: 16-bit dsPIC33E/PIC24E CPU
• Code-efficient (C and Assembly) architecture
• Two 40-bit wide accumulators
• Single-cycle (MAC/MPY) with dual data fetch
• Single-cycle mixed-sign MUL plus hardware divide
• 32-bit multiply support
Clock Management
• 2% internal oscillator
• Programmable PLLs and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Fast wake-up and start-up
Power Management
• Low-power management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.0 mA/MHz dynamic current (typical)
• 60 µA IPD current (typical)
High-Speed PWM
• Up to seven PWM pairs with independent timing
• Dead Time for rising and falling edges
• 8.32 ns PWM resolution
• PWM support for:
- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM
• Programmable Fault inputs
• Flexible trigger configurations for ADC conversions
Advanced Analog Features
• Two independent ADC modules:
- One ADC configurable as 10-bit, 1.1 Msps with four
S&H or 12-bit, 500 ksps with one S&H
- One 10-bit ADC, 1.1 Msps with four S&H
- Eight S&H using both ADC 10-bit modules
- 24 analog channels (64-pin devices) up to 32 analog
channels (100/121/144-pin devices)
• Flexible and independent ADC trigger sources
• Comparators:
- Up to three Analog Comparator modules
- Programmable references with 32 voltage points
Packages
Type
QFN
TQFP
Pin Count
64 64 144
I/O Pins (up to)
53
53 122
Contact/Lead Pitch
0.50
0.50
0.40
Dimensions
9x9x0.9
10x10x1 16x16x1
Note: All dimensions are in millimeters (mm) unless specified.
Timers/Output Compare/Input Capture
• 27 General Purpose Timers:
- Nine 16-bit and up to four 32-bit Timers/Counters
- 16 OC modules configurable as Timers/Counters
- Two 32-bit Quadrature Encoder Interface (QEI)
modules configurable as Timers/Counters
• 16 IC modules
• Peripheral Pin Select (PPS) to allow function remap
• Real-Time Clock and Calendar (RTCC) module
Communication Interfaces
• USB 2.0 OTG-compliant full-speed interface
• Four UART modules (15 Mbps)
- Supports LIN 2.0 protocols and IrDA®
• Four 4-wire SPI modules (15 Mbps)
• Two ECAN™ modules (1 Mbaud) CAN 2.0B support
• Two I2C modules (up to 1 Mbaud) with SMBus support
• Data Converter Interface (DCI) module with support for
I2S and Audio codecs
• PPS to allow function remap
• Parallel Master Port (PMP)
• Programmable Cyclic Redundancy Check (CRC)
Direct Memory Access (DMA)
• 15-channel DMA with user-selectable priority arbitration
• UART, USB, SPI, ADC, ECAN, IC, OC, Timers,
DCI/I2S, PMP
Input/Output
• Sink/Source 10 mA on all pins
• 5V-tolerant pins
• Selectable open drain, pull-ups, and pull-downs
• Up to 5 mA overvoltage clamp current
• External interrupts on all I/O pins
Qualification and Class B Support
• AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) planned
• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC) planned
• Class B Safety Library, IEC 60730
Debugger Development Support
• In-circuit and in-application programming
• Five program and three complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan
• Trace and run-time watch
TQFP
100
83
0.40
0.50
12x12x1 14x14x1
TFBGA
121
83
0.50
10x10x1.2
LQFP
144
122
0.50
20x20x1.4
© 2009-2012 Microchip Technology Inc.
Preliminary
DS70616F-page 1
1 page  
dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
Pin Diagrams
64-Pin QFN
= Pins are up to 5V tolerant
AN29/PMD5/RP85/RE5
AN30/PMD6/RPI86/RE6
AN31/PMD7/RP87/RE7
C1IN3-/SCK2/PMA5/RP118/RG6
C1IN1-/SDI2/PMA4/RPI119/RG7
C2IN3-/SDO2/PMA3/RP120/RG8
MCLR
C2IN1-/PMA2/RPI121/RG9
VSS
VDD
AN5/C1IN1+/RPI37/RB5
AN4/C1IN2-/RPI36/RB4
AN3/C2IN1+/RPI35/RB3
AN2/C2IN2-/RPI34/RB2
PGEC3/AN1/VREF-/RPI33/RB1
PGED3/AN0/VREF+/RPI32/RB0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
dsPIC33EP512GP806
PIC24EP512GP806
48 PGEC2/SOSCO/C3IN1-/T1CK/RPI62/RC14
47 PGED2/SOSCI/C3IN3-/RPI61/RC13
46 INT0/RP64/RD0
45 PMCS1/RPI75/RD11
44 ASCL1/PMCS2/RPI74/RD10
43 ASDA1/RPI73/RD9
42 RTCC/RPI72/RD8
41 VSS
40 OSC2/CLKO/RC15
39 OSC1/RPI60/RC12
38 VDD
37 SCLI/RG2
36 SDA1/RG3
35 RP102/RF6
34 RP98/RF2
33 RP99/RF3
Note 1: The RPn/RPIn pins can be used by any remappable peripheral with some limitation. See
Section 11.4 “Peripheral Pin Select” for available peripherals and for information on limitations.
2: Every I/O port pin (RAx-RGx) can be used as change notification (CNAx-CNGx). See Section 11.0
“I/O Ports” for more information.
3: The availability of I2C interfaces varies by device. Selection (SDAx/ SCLx or ASDAx/ASCLx) is made
using the device Configuration bits, ALTI2C1 and ALTI2C2 (FPOR<5:4>). See Section 29.0
“Special Features” for more information.
© 2009-2012 Microchip Technology Inc.
Preliminary
DS70616F-page 5
5 Page 
dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
Pin Diagrams (Continued)
121-Pin TFBGA(1)
123
dsPIC33EP256MU810
dsPIC33EP512MU810
= Pins are up to 5V tolerant
4 5 6 7 8 9 10 11
A
RE4
RE3 RG13 RE0 RG0 RF1
VDD
NC RD12 RD2 RD1
B
NC
RG15
RE2
RE1
RA7
RF0
VCAP
RD5
RD3
VSS RC14
C
RE6
VDD RG12 RG14 RA6
NC
RD7
RD4
NC RC13 RD11
D
RC1 RE7 RE5 NC
NC
NC
RD6
RD13 RD0
NC RD10
E
RC4
RC3
RG6
RC2
NC
RG1
NC
RA15 RD8
RD9 RA14
F
MCLR
RG8
RG9
RG7
VSS
NC
NC VDD RC12 VSS RC15
G
RE8 RE9 RA0 NC VDD VSS VSS NC RA5 RA3 RA4
H
RB5
RB4
NC
NC
NC VDD
NC
VBUS VUSB3V3 RG2
RA2
J
RB3
RB2
RB7
AVDD RB11
RA1
RB12
NC
NC RF8 RG3
K
RB1
RB0
RA10
RB8
NC
RF12
RB14
VDD RD15 RF3
RF2
L
RB6
RA9
AVSS
RB9
RB10 RF13
RB13
RB15 RD14
RF4
RF5
Note 1: Refer to Table 2 for full pin names.
© 2009-2012 Microchip Technology Inc.
Preliminary
DS70616F-page 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet PIC24EP512GP806.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PIC24EP512GP806 | 16-bit Microcontrollers and Digital Signal Controllers | Microchip |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |