|
|
Número de pieza | HD74ALVCH162374 | |
Descripción | 16-bit Edge triggered D-type Flip Flops with 3-state Outputs | |
Fabricantes | Hitachi Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HD74ALVCH162374 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! HD74ALVCH162374
16-bit Edge triggered D-type Flip Flops with 3-state Outputs
ADE-205-180B (Z)
Preliminary
3rd. Edition
October 1997
Description
The HD74ALVCH162374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional
bus drivers, and working registers. It can be used as two 8-bit flip flops or one 16-bit flip flop. On the
positive transition of the clock (CLK) input, the Q outputs of the flip flop take on the logic levels set up at
the data (D) inputs.
The output enable (OE) input can be used to place the eight outputs in either a normal logic state (high or
low logic levels) or a high impedance state. In the high impedance state, the outputs neither load nor drive
the bus lines significantly. The high impedance state and the increased drive provide the capability to drive
bus lines without need for interface or pullup components. OE does not affect internal operations of the
flip flops. Old data can be retained or new data can be entered while the outputs are in the high impedance
state.
Active bus hold circuitry is provided to hold unused or floating data inputs at a valid logic level. All
outputs, which are designed to sink up to 12 mA, include 26 Ω resistors to reduce overshoot and
undershoot.
Features
• VCC = 2.3 V to 3.6 V
• Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
• Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
• High output current ±12 mA (@VCC = 3.0 V)
• Bus hold on data inputs eliminates the need for external pullup / pulldown resistors
• All outputs have equivalent 26 Ω series resistors, so no external resistors are required.
1 page Logic Diagram
1OE 1
1CLK 48
47
1D1
C1
1D
HD74ALVCH162374
2
1Q1
To seven other channels
2OE 24
2CLK 25
36
2D1
C1
1D
13
2Q1
To seven other channels
5
5 Page Package Dimensions
12.50
+0.3
–0.1
48
25
HD74ALVCH162374
Unit : mm
1
0.20
+0.1
–0.05
24
0.50
0.08 M
0.65 Max
0.10
8.10 ± 0.3
10° Max
0.50 ± 0.1
Hitachi Code
JEDEC Code
EIAJ Code
TTP-48DC
—
—
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet HD74ALVCH162374.PDF ] |
Número de pieza | Descripción | Fabricantes |
HD74ALVCH162373 | 16-bit Transparent D-type Latches with 3-state Outputs | Hitachi Semiconductor |
HD74ALVCH162374 | 16-bit Edge triggered D-type Flip Flops with 3-state Outputs | Hitachi Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |