|
|
Número de pieza | LS33600LM | |
Descripción | 3.6V Primary lithium-thionyl chloride (Li-SOCl2)High energy D-size bobbin cel | |
Fabricantes | SAFT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LS33600LM (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Primary lithium batteries
LS 33600LM
3.6V Primary lithium-thionyl chloride (Li-SOCl 2)
High energy
D-size bobbin cell
with low magnetic signature
For magnetism-sensitive applications
requesting good voltage response
and operating life in - 60°C/+ 85°C
environments.
Key features
q High and stable operating voltage
q Low self-discharge rate
(less than 1% after 1 year of
storage at + 20°C)
q Stainless steel construction
q Hermetic glass-to-metal sealing
q Built-in safety vent
q Non-flammable electrolyte
q Restricted for transpor t (Class 9)
q Typical magnetic signatures:
200 nT (2 mGauss) at 6 mm
10 nT (0.1 mGauss) at 127 mm
3 nT (0.03 mGauss) at 300 mm
Main applications
q Seismic surveying
q Oceanographic instrumentation
q Buoys
q Scientific equipment
etc...
Optional upon request
q Specific cell terminations
q Multi-cell battery packs
Cell size references
UM1 – R20 – D
Electrical characteristics
(typical values relative to cells stored for one year or less at + 30°C max.)
Nominal capacity
(at 5 mA + 20°C 2.0V cut off. The capacity restored by the cell varies
according to current drain, temperature and cut off).
Open circuit voltage (at + 20°C)
Nominal voltage
(at 0.7mA + 20°C)
17.0 Ah
3.67V
3.6V
Pulse capability: Typically up to 400 mA (400 mA/0.1 second pulses,
drained every 2 mn at + 20°C from undischarged cells with 10 µA base
current, yield voltage readings above 3.0V. The readings may var y according
to the pulse characteristics, the temperature, and the cell's previous histor y.
Fitting the cell with a capacitor may be recommended in severe conditions.
Consult Saft)
Continuous current permitting 50% of the nominal capacity
to be achieved at + 20°C with 2.0V cut of f.
(Higher currents possible, consult Saft)
250 mA
Storage
(recommended)
(for more severe conditions, consult Saft)
+ 30°C (+ 86°F) max
Operating temperature range
(Operation above ambient T may lead to reduced capacity and
lower voltage readings at the beginning of pulses. Consult Saft)
- 60°C/+ 85°C
(- 76°F/+ 185°F)
Physical characteristics
Diameter (max)
Height (max)
Typical weight
Li metal content
33.4 mm (1.32 in)
60.2 mm (2.37 in)
90 g (3.2 oz)
approx. 4.5 g
September 2004
http://www.Datasheet4U.com
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet LS33600LM.PDF ] |
Número de pieza | Descripción | Fabricantes |
LS33600LM | 3.6V Primary lithium-thionyl chloride (Li-SOCl2)High energy D-size bobbin cel | SAFT |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |