|
|
Número de pieza | MD7150H | |
Descripción | (MD71XXH Series) High Input(30V) CMOS Voltage Regulator | |
Fabricantes | MINGDA MICROTRONICS | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MD7150H (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! SHANGHAI MINGDA MICROTRONICS CO,LTD
Low Quiescent Current Low Dropout
MD71XXH Series
High Input(30V)CMOS Voltage Regulator
30mA
The MD71XXH series is a family of Low Dropout Positive regulators.which developed by using
CMOS technology. These IC products perform with high output voltage accuracy, low quiescent
current , Low Input-Output Dropout as built-in low on-resistance.At the same time with high input
voltage capacity it can be up to 30V, suitable for applications which requires higher voltage
circuit.
■ Ferture(Typical):
·high output voltage accuracy
±3%
·low dropout voltage
40mV
·low quiescent current
1.2uA
·low output voltage temperature drift
50 PPm /℃
·high input voltage
up to 30V keeping stable output voltage
·Output short circuit protection
Short-circuit current less than 100 mA
■ Applications
·battery-powered devices
·communications equipments
·portable medical equipments
·mobile phone devices
·home electric/toy appliances
■ Selection table
Part NO.
Output voltage
(Note)
Tolerance
MD7130
MD7133
MD7136
MD7144
MD7150
3.0V
3.3V
3.6V
4.4V
5.0V
±3%
±3%
±3%
±3%
±3%
NOTE: for semi_custom parts selectable output voltage from 1.5~7.0V in 0.1v
Increment.
1
Free Datasheet http://www.Datasheet4U.com
1 page 3.
■Standard Circuit:
Note: The above connection diagram and constant will not guarantee successful
operation.Perform through evaluation using the actual application to set the constant.
■using conditions:
Input capacitors(CIN): >1.0 µF.
Output capacitors(CL): >2.2 µF(tantalum capacitors).
*1. CIN is a capacitor for stabilizing the input.
*2. A ceramic capacitor can be used for CL besides a tantalum capacitor.
* Note: In general, linear regulated power supply may lead to oscillation by choosing the
different external components. Please make sure the capacitor before used in the application
circuit does not oscillate.
■Technical Terms
1. Output capacitors (CL)
Output capacitors are generally used to stabilize regulation operation and to improve
transient response characteristics. But the MD71XXH series can provide stable operation
without output capacitors. Capacitors are used only to improve transient response
characteristics. Output capacitors can hence be removed in applications in which
transient response can be negligible. When an output capacitor is used, a low ESR
(Equivalent Series Resistance) capacitor like ceramic capacitor can also be used.
5
Free Datasheet http://www.Datasheet4U.com
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet MD7150H.PDF ] |
Número de pieza | Descripción | Fabricantes |
MD7150 | (MD71xx) CMOS | ETC |
MD7150H | (MD71XXH Series) High Input(30V) CMOS Voltage Regulator | MINGDA MICROTRONICS |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |