|
|
Número de pieza | AZ742 | |
Descripción | 10A DPDT MINIATURE POWER RELAY | |
Fabricantes | Zettler | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AZ742 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! AZ742
10 A DPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Low height: 15.7 mm
• Epoxy sealed version available
• 10 Amp switching (N.O. contact only)
• AC and DC coils
• Isolation spacing greater than 10 mm
• Proof tracking index (PTI/CTI) 250
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E43203
• VDE file 40012572
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
VDE
Material
Resistance
DPDT (2 Form C)
DPST (2 Form A)
Resistive load:
Max. switched power: 2 X 240 W or 2000 VA
Max. switched current: 2 X 10 A
Max. switched voltage: 300 VDC* or 400 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
8 A at 250 VAC resistive [1][2]
10 A at 250 VAC resistive, 30k cycles (N.O.) [1]
8 A at 250 VAC resistive [1][2]
Silver nickel [1], silver tin oxidel [2],
gold plating available
< 100 miliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
200 mW (DC coil)
.422 VA (AC coil)
1.7 W at 20°C (68°F) ambient
1.7 VA at 20°C (68°F) ambient
26°C (47°F) at nominal coil voltage
155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 107
1 x 105 at 8 A 250 VAC res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 2500 Vrms between contact sets
1000 Vrms between open contacts
Insulation
Resistance
105 megohms min. at 500 VDC,
20°C, 50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Dropout DC coils
AC coils
Ambient Temperature
Operating
Storage
B250 at 2 Form C, flux proof version
C250 at other relay versions
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Greater than 10% of nominal coil voltage
Greater than 15% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F) - DC coils
-40°C (-40°F) to 70°C (158°F) - AC coils
-40°C (-40°F) to 105°C (221°F)
Vibration
Break contacts: 5 g at 20…500 Hz
Make contacts: 20 g at 30…500 Hz
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
20 g
P.B.T. polyester, UL-94 : V0
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
14 grams
20 per carton tube / 1000 per carton box
9-2-11
Free Datasheet http://www.datasheet4u.net/
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet AZ742.PDF ] |
Número de pieza | Descripción | Fabricantes |
AZ742 | 10A DPDT MINIATURE POWER RELAY | Zettler |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |