|
|
PDF CRA12E Data sheet ( Hoja de datos )
| Número de pieza | CRA12E | |
| Descripción | Thick Film Resistor Array | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CRA12E (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
CRA12E, CRA12S
Vishay
Thick Film Resistor Array
FEATURES
• Convex terminal array available with either
scalloped corners (E version) or square corners
(S version)
• Wide ohmic range: 10R to 1M0
• 4, 8, 10 or 16 terminal package with isolated resistors
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CIRCUIT
POWER RATING LIMITING ELEMENT TEMPERATURE
P70 °C
VOLTAGE MAX.
COEFFICIENT
W V≅ ppm/K
CRA12E
CRA12S
01; 02; 20
03
0.100
± 100
50
0.125
± 200
Zero-Ohm-Resistor: Rmax. = 50 mΩ, Imax. = 1.5 A
TOLERANCE
%
±1
± 2; ± 5
RESISTANCE
RANGE
Ω
10R - 1M0
E-SERIES
24 + 96
24
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation at 70 °C (2)
Limiting Element Voltage (1)
UNIT
W per element
V≅
CRA12E & S - 01/02/20 CIRCUIT
0.1
50
CRA12E & S - 03 CIRCUIT
0.125
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
Vdc/ac peak
°C
Ω
100
- 55 to + 155
> 109
Notes
(1) Rated voltage: P × R
(2) The power dissiaption on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRA12E08347K0JTR (3)
C RA 12 E 0 8 3 4 7 K 0 J TR
MODEL
CRA12
TERMINAL STYLE
S
E
PIN
04
08
10
16
CIRCUIT
1 = 01
2 = 02
3 = 03
8 = 20
PRODUCT DESCRIPTION: CRA12S 08 03 473 J RB8 e3
CRA12S
08
03
VALUE
R = Decimal
K = Thousand
M = Million
0000 = 0 Ω Jumper
473
TOLERANCE
F=±1%
G=±2%
J=±5%
Z = 0 Ω Jumper
J
PACKAGING (4)
TR
TL
RB8
SPECIAL
Up to 2 digits
e3
MODEL
CRA12E
CRA12S
TERMINAL COUNT
04
08
10
16
CIRCUIT TYPE
01
02
03
20
RESISTANCE VALUE
473 = 47 kΩ
4702 = 47 kΩ
10R0 = 10 Ω
100 = 10 Ω
000 = 0 Ω Jumper
First two digits (three
for 1 %) are significant.
Last digit is the
multiplier
Notes
(3) Preferred way for ordering products is by use of the PART NUMBER
(4) Please refer to table PACKAGING, see next page
TOLERANCE
F=±1%
G=±2%
J=±5%
Z = 0 Ω Jumper
PACKAGING (4) LEAD (Pb)-FREE
RB8 e3 = Pure tin
RD7
Termination fnish
www.vishay.com
260
For technical questions, contact: [email protected]
Document Number: 31003
Revision: 13-Oct-08
Free Datasheet http://www.datasheet4u.com/
1 page  
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Free Datasheet http://www.datasheet4u.com/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CRA12E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CRA12E | Thick Film Resistor Array | Vishay |
| CRA12S | Thick Film Resistor Array | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |