|
|
PDF LM6029ACW Data sheet ( Hoja de datos )
| Número de pieza | LM6029ACW | |
| Descripción | LCD Module | |
| Fabricantes | Topway | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LM6029ACW (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
LM6029ACW
LCD Module User Manual
Prepared by:
Cai
Date: 2008-07-23
Checked by:
Date:
Rev. Descriptions
0.1 Preliminary release
Approved by:
Date:
Release Date
2008-07-23
URL: www.topwaydisplay.com
www.topwaysz.com
Document Name: LM6029ACW-Manual-Rev0.1.DOC
Page: 1 of 11
Free Datasheet http://www.datasheet4u.com/
1 page  
TOPWAY
LCD Module User Manual
LM6029ACW
2. Absolute Maximum Ratings
Items
Symbol
Min.
Max. Unit Condition
Supply Voltage
VDD -0.3
+3.4
V VSS = 0V
Input Voltage
VIN
-0.3
VDD+0.3
V VSS = 0V
Operating Temperature
TOP
-20
+70 °C No Condensation
Storage Temperature
TST -30
+80 °C No Condensation
Cautions:
Any Stresses exceeding the Absolute Maximum Ratings may cause substantial damage to the device. Functional
operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure
to extreme conditions may affect device reliability.
3. Electrical Characteristics
3.1 DC Characteristics
Items
Operating Voltage
Input High Voltage
Input Low Voltage
Operating Current
Symbol
VDD
VIH
VIL
IDD
MIN.
2.9
0.8xVDD
VSS
-
TYP.
3.3
-
-
0.15
VSS=0V, VDD=3.3V, TOP=25°C
MAX. Unit Condition /
Application Pin
3.4 V VDD
VDD
0.2xVDD
1.4
V /RES, /CS1, RS,
V D0~D7,/WR,/RD
mA VDD
3.2 LED Backlight Circuit Characteristics
Items
Symbol MIN.
TYP.
MAX.
VSS=0V, IfBLA=39mA, TOP =25°C
Unit Applicable Pin
Forward Voltage
Forward Current
Cautions:
VfBLA - 3.3 -
V BLA
IfBLA - 39 60 mA BLA
Exceeding the recommended driving current could cause substantial damage to the backlight and shorten its lifetime.
BLA
VSS
No. of LED = 3pcs
URL: www.topwaydisplay.com
www.topwaysz.com
Document Name: LM6029ACW-Manual-Rev0.1.DOC
Page: 5 of 11
Free Datasheet http://www.datasheet4u.com/
5 Page 
TOPWAY
LCD Module User Manual
LM6029ACW
5. Design and Handling Precaution
1. The LCD panel is made by glass. Any mechanical shock (eg. dropping form high place)
will damage the LCD module.
2. Do not add excessive force on the surface of the display, which may cause the Display
color change abnormally.
3. The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD
protective film until the last step of installation.
4. Never attempt to disassemble or rework the LCD module.
5. Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (eg. water)
may damage the LCD.
6. When mounting the LCD module, make sure that it is free form twisting, warping and
distortion.
7. Ensure to provide enough space (with cushion) between case and LCD panel to prevent
external force adding on it, or it may cause damage to the LCD or degrade the display
result.
8. Only hold the LCD module by its side. Never hold LCD module by add force on the heat
seal or TAB.
9. Never add force to component of the LCD module. It may cause invisible damage or
degrade of the reliability.
10. LCD module could be easily damaged by static electricity. Be careful to maintain an
optimum anti-static work environment to protect the LCD module.
11. When peeling off the protective film from LCD, static charge may cause abnormal
display pattern. It is normal and will resume to normal in a short while.
12. Take care and prevent get hurt by the LCD panel sharp edge.
13. Never operate the LCD module exceed the absolute maximum ratings.
14. Keep the signal line as short as possible to prevent noisy signal applying to LCD module.
15. Never apply signal to the LCD module without power supply.
16. IC chip (eg. TAB or COG) is sensitive to the light. Strong lighting environment could
possibly cause malfunction. Light sealing structure casing is recommend.
17. LCD module reliability may be reduced by temperature shock.
18. When storing the LCD module, avoid exposure to the direct sunlight, high humidity, high
temperature or low temperature. They may damage or degrade the LCD module
URL: www.topwaydisplay.com
www.topwaysz.com
Document Name: LM6029ACW-Manual-Rev0.1.DOC
Page: 11 of 11
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet LM6029ACW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LM6029ACW | LCD Module | Topway |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |