|
|
PDF MSP5.0A Data sheet ( Hoja de datos )
| Número de pieza | MSP5.0A | |
| Descripción | Surface Mount TRANSZORB Transient Voltage Suppressors | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MSP5.0A (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
New Product
MSP5.0A
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
eSMPTM Series
Top View
Bottom View
MicroSMP
PRIMARY CHARACTERISTICS
VWM
PPPM
IFSM
TJ max.
5.0 V
100 W
25 A
150 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
specifically for protecting 5.0 V supplied sensitive
equipment against transient overvoltages.
FEATURES
• Very low profile - typical height of 0.65 mm
• Ideal for automated placement
• Oxide planar chip junction
• Uni-directional polarity only
• Peak pulse power: 100 W (10/1000 µs)
• ESD capability: 15 kV (air), 8 kV (contact)
• Meets MSL level 1, per J-STD-020C, LF maximum
peak of 260 °C
• Solder dip 265 °C max. 10 s, per JESD 22-A111
• AEC-Q101 qualified
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21
definition
• Find out more about Vishay’s Automotive Grade
Product requirements at:
www.vishay.com/applications
MECHANICAL DATA
Case: MicroSMP
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-M3 - halogen-free and RoHS compliant,
commercial grade
Base P/NHM3 - halogen-free and RoHS compliant,
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3
suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation (1)(2)
Peak pulse current with a 10/1000 µs waveform (fig. 1)
Non repetitive peak forward surge current 10 ms single half sine-wave (2)
Power dissipation TL = 120 °C (2)
Operating junction and storage temperature range
Notes
(1) Non-repetitive current pulse, per fig. 1
(2) Mounted on 6.0 mm x 6.0 mm copper pads to each terminal
SYMBOL
PPPM
IPPM
IFSM
PD
TJ, TSTG
VALUE
100
10.9
25
1.0
- 55 to + 150
UNIT
W
A
A
W
°C
Document Number: 88487
Revision: 16-Jun-09
For technical questions within your region, please contact one of the following:
www.vishay.com
1
Free Datasheet http://www.datasheet4u.com/
1 page  
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Free Datasheet http://www.datasheet4u.com/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MSP5.0A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MSP5.0A | Surface Mount TRANSZORB Transient Voltage Suppressors | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |