|
|
PDF ALM-32220 Data sheet ( Hoja de datos )
| Número de pieza | ALM-32220 | |
| Descripción | Amplifier | |
| Fabricantes | AVAGO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ALM-32220 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
ALM-32220
1.7 GHz – 2.7 GHz
2 Watt High Linearity Amplifier
Data Sheet
Description
Avago Technologies’ ALM-32220 is a high linearity 2 Watt
PA with good OIP3 performance and exceptionally good
PAE at 1dB gain compression point, achieved through the
use of Avago Technologies’ proprietary 0.25 µm GaAs En-
hancement-mode pHEMT process.
All matching components are fully integrated within the
module. This makes the ALM-32220 extremely easy to use.
The adjustable temperature-compensated internal bias
circuit allows the device to be operated at either class A
or class AB operation. The ALM-32220 is housed inside a
miniature 7.0 × 10.0 × 1.1 mm3 20-lead multiple-chips-on-
board (MCOB) module package.
Component Image
7.0 × 10.0 × 1.1 mm3 20-Lead MCOB Package
Vdd1 Vctrl
18 19
20
17 1
32220
WWYY
XXXX
Top View
16 2
15 3
RF OUT 14
4 RF IN
13 5
12 6
11 7
10 9
8
Vdd2 Not Used
Bottom View
Notes:
Package marking provides orientation and identification
“32220” = Device Part Number
“WWYY” = Work week and year of manufacture
“XXXX” = Last 4 digit of lot number
Features
• Fully matched, input and output
• High linearity and P1dB
• Unconditionally stable across load condition
• Built-in adjustable temperature compensated internal
bias circuitry
• GaAs E-pHEMT Technology[1]
• 5V supply
• Excellent uniformity in product specifications
• Tape-and-Reel packaging option available
• MSL-3 and Lead-free
• High MTTF for base station application
Specifications
2GHz; 5V, 800mA (typical)
• 14.8 dB Gain
• 50.0 dBm Output IP3
• 34.4 dBm Output Power at 1dB gain compression
• 47.5% PAE at P1dB
• 3.5dB Noise Figure
Applications
• Class A driver amplifier for GSM/PCS/W-CDMA/WiMAX
Base Stations.
• General purpose gain block.
Note:
1. Enhancement mode technology employs positive gate voltage,
thereby eliminating the need of negative gate voltage associated
with conventional depletion mode devices.
2. Good RF practice requires all unused pins to be earthed.
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 200 V
ESD Human Body Model = 1000 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Free Datasheet http://www.datasheet4u.com/
1 page  
1,2
83
R3
To B
C3 C2
50-Ohms TL
Bias
Input
match
R4
To A
R1
C5 C4 C1 Z1
Output
match
50-Ohms TL
Module
C7
B
C6
13
C9
R2
C8 C10
A
Z2
Circuit Symbol
C1, C10
C2, C4, C9
C3, C5, C8
C6, C7
R1, R2
R3
R4
Z1, Z2
Size
0805
0402
0402
0402
1206
0402
0805
0805
18
Note:
To supply Vdd1 and Vdd2 individually, remove R4 and supply Vdd1 from
pin 1,2 and Vdd2 from pin 19,20
Figure 6. Demo board application schematics and components table
Value
2.2uF
0.1uF
10nF
Not Used
0 Ohm
Not Used
0 Ohm
Optional
Description
Ceramic Chip Capacitor
Ceramic Chip Capacitor
Ceramic Chip Capacitor
N/A
Chip Resistor
N/A
Chip Resistor
Zener Diode 5.6V
(Optional)
DC Pin Configuration of 20-pin Connector
Pins pointing out of the page
Unit is on top
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
20 pin Connector
10 1
Vdd 1 – Pin 1, 2
Vsense1 – Pin 3
Vdd 2 – Pin 19, 20 (optional)
Vsense2 – Pin 18 (optional)
Vctrl – Pin 8
Other pins are grounded
RF
input
RF
output
Figure 7. Demo board Layout
1. Recommended PCB material is 10 mils Rogers RO4350, with FR4 backing for mechanical strength.
2. Suggested component values may vary according to layout and PCB material.
5
Free Datasheet http://www.datasheet4u.com/
5 Page 
Reel Dimensions – 13 Inch
ESD Label
(See Below)
Recycle Symbol
Detail ‘X’
76.2mm
Embossed Line X2 90.0mm Length
Lines 147.0mm away
from center point
Embossed ‘M’ 5.0mm Height
FRONT VIEW
Recycle Symbol
See Detail ‘X’
25.65±1.75**
25.4±1.0*
FRONT
ESD Label
Ø20.2 (Min)
Ø13.1
+0.5
-0.2
2.2±0.5
BACK
Detail ‘X’
BACK VIEW
Detail ‘Y’
Slot 10.0±0.5(2x)
Slot 5.0±0.5***(1x)
30.4*
Max
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved.
AV02-1146EN - March 18, 2013
1.0
4.0
Detail ‘Y’
(Slot Hole)
Free Datasheet http://www.datasheet4u.com/
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet ALM-32220.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ALM-32220 | Amplifier | AVAGO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |