|
|
Número de pieza | AST2300 | |
Descripción | Configuration Guide | |
Fabricantes | Tyan | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AST2300 (archivo pdf) en la parte inferior de esta página. Total 61 Páginas | ||
No Preview Available ! AST2300 iBMC
Configuration Guide
Version 1.0a
Copyright
Copyright © 2012 MiTAC International Corporation. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
MiTAC International Corporation.
Notice
Information contained in this document is furnished by MiTAC International
Corporation and has been reviewed for accuracy and reliability prior to printing.
MiTAC assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN® products including liability or
warranties relating to fitness for a particular purpose or merchantability. MiTAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MiTAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.
1
Free Datasheet http://www.datasheet4u.com/
1 page 1. IPMI OS Drivers and Open Source Software
AST2300 firmware is full compliant with IPMI 2.0 specification. So users could use
standard IPMI driver comes from operation system distribution.
1.1 Windows IPMI Driver
AST2300 supports Intel reference driver, you can get it from
http://www.intel.com/design/servers/ipmi/tools.htm
From Windows Server 2003 R2, Microsoft also provide in box IPMI driver. You can
use it also.
1.2 Open IPMI Driver on Linux
AST2300 supports the Open IPMI driver in Linux Kernel. Use the following
commands to load IPMI drivers.
“modprobe ipmi_devintf”
“modprobe ipmi_si”
If you use old version Linux Kernel, you need to replace module “ipmi_si” with
“ipmi_kcs”
Note that TYAN motherboard BIOS encodes IPMI Base IO address at 0xCA2 in its
DMI table IPMI entry, any generic OS IPMI drivers should have no problem to
support it.
1.3 IPMI Tool and Other Open Source Software
AST2300 supports open source software IPMI Tool, you can also use other ones
like Open IPMI, IPMI Utility. Note that for IPMI Tool SOL session, user needs to use
BIOS setup menu to configure “Remote Serial Console Redirect” to use COMA, and
set baud rate to 38.4K, 8 bits, no parity, and Xon/Xoff handshaking.
5
Free Datasheet http://www.datasheet4u.com/
5 Page 2.5.1 Sensor Readings
In MegaRAC GUI, the Sensor Readings Page displays all the sensor related
information.
To open the Sensor Readings Page, click Server Health Sensor Readings from
the top menu. Click on a record to show more information about that particular
sensor, including thresholds and a graphical representation of all associated events.
A screenshot of Sensor Readings Page is given below.
11
Free Datasheet http://www.datasheet4u.com/
11 Page |
Páginas | Total 61 Páginas | |
PDF Descargar | [ Datasheet AST2300.PDF ] |
Número de pieza | Descripción | Fabricantes |
AST2300 | Integrated Baseboard Management Controller | Tyan |
AST2300 | Configuration Guide | Tyan |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |