|
|
PDF AZ3830 Data sheet ( Hoja de datos )
| Número de pieza | AZ3830 | |
| Descripción | User Guide | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AZ3830 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
MP3-CD Soundmachine
User Manual
Manuel d'utilisation
Manual del usario
Benutzerhandücher
AZ3830
Meet Philips at the Internet
http://www.philips.com
W
CLASS 1
LASER PRODUCT
AZ3830
Printed in China
JH-0634
1 page  
MP3-CD/ CD Player
About MP3
The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while
maintaining CD quality sound.
• Getting MP3 files: you can either download
legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)
• Creating a MP3 CD: burn the music files
from your computer hard disc on a CDR or
CDRW using your CD burner.
Helpful hints:
➜ “ NO CD” will be displayed if CD is not
loaded.
3 Press / to open the disc door.
4 Insert a disc with the printed side facing up
and press the disc door gently to close.
➜ The disc scanning of MP3-CD may run
longer than audio CD.
➜ Display:The total number of tracks
appears (and album number for MP3/WMA)
(see 4).
5 Press 2; to start playback.
➜ First the song title of the track scrolls
across the display, then the track number
and the elapsed playing time are displayed.
For MP3-CD/ WMA only:
➜ The current track number (TRK) and
album number (ALB) will be displayed
interchangeably.
– Make sure that the file names of the MP3 files
end with .mp3 or .wma.
– Number of albums: maximum 100.
– Number of tracks: maximum 999.
– The length of file names affects the number of
tracks for playback. With shorter file names,
more files can be burned on a disc.
Playing a disc
This player plays Audio Discs including CD-R/
CD-RW, MP3 CD and WMA. Do not try to
6 To pause playback press 2;.
➜ Display: 2 and the elapsed playing time
flash.
7 Press 2; again to resume playback.
8 To stop playback, press 9.
Helpful hints:
The disc playback will also stop when:
– you open the disc compartment door;
– you select FM, MW or AUX;
– the disc has reached the end of the playback.
play a CD-ROM, CD-I, CDV,VCD, DVD or
computer CD.
Selecting a different track
• Press ∞ or § once or repeatedly until the
IMPORTANT!
desired track number appears in the display.
• CDs encoded with copyright protection
technologies by some record companies may
For MP3-CD/WMA: First press
ALBUM/PRESET +/- ( ALBUM/PRE-
be unplayable by this product.
SET 3, 4 on the remote control ) once or
• DRM-protected WMA disc is not supported.
more to find your album.
1 Press repeatedly SOURCE (CD on the
remote control) to select CD source.
➜ Display shows flashing “READ” if CD
source is selected (see 3).
• In the pause/stop position, press 2; to start
playback.
MP3-CD/ CD Player
Finding a passage within a
track
1 During playback, press and hold down
∞ or §.
➜ The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release ∞ or §.
➜ Normal playback resumes.
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once
in the stop position);
– selecting FM, MWor AUX;
– pressing POWER to power off;
– opening the disc door.
➜ “PROGRAM CLEAR” scrolls across the
display once, and “PROG” disappears.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press ∞ or § to select
your desired track number.
• For MP3-CD/WMA: First press
ALBUM/PRESET +/- ( ALBUM/PRE-
SET 3, 4 on the remote control ) once or
more to find your album.
2 Press PROG to store tdesired track.
➜ Display shows “PRO 2” , indicating the
next program location available (See 5).
• If you attempt to program without first
selectig a track, display will show “SELECT
TRARCK” briefly, then the total track number
and playing time.
3 Repeat steps 1 to 2 to select and store all
desired tracks.
4 Press 2; to play the program.
➜ “PROG” is dispalyed during program
playback.
To review your program
In the stop position, press and hold PROG 3
seconds.
➜ The display shows all the stored tracks
(and album numbers for MP3) in sequence.
Helpful hints:
– Display shows “PRO 1” if no track is
programmed.
– If you try to store more than 20 tracks, no
track can be stored and the display will show
”PROGRAM FULL”.
Selecting different play
modes (See 6)
You can select and change the various play
modes before or during playback, and
combine play modes with PROG.
REP – plays the current track continuously.
REP ALL – plays the entire disc/program
continuously.
SHUF – plays all tracks in random order.
REP ALL SHUF – plays all tracks in
random order continuously.
1 To select play modes, press MODE on the
set (REPEAT or SHUFFLE on the remote
contorl) once or more.
2 Press 2; to start playback if in the stop
position.
➜ Shuffle play will start automatically soon
after shuffle mode is selected.
3 To select normal playback, press MODE on
the set (REPEAT or SHUFFLE on the
remote control) repeatedly until the various
play modes are no longer displayed.
– You can also press 9 to cancel your play
modes.
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet AZ3830.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AZ3830 | User Guide | Philips |
| AZ3830 | (AZ3830 / AZ3855) Service Manual | Philips |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |