|
|
Número de pieza | SKY65364-11 | |
Descripción | 900 MHz Transmit/Receive Front-End Module | |
Fabricantes | Skyworks Solutions | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SKY65364-11 (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
No Preview Available ! DATA SHEET
SKY65364-11: 900 MHz Transmit/Receive Front-End Module
Applications
• Automated meter reading
• Advanced metering infrastructure
• ISM systems
Features
• Transmit output power > +30.5 dBm
• High efficiency PA
• Analog power control
• Receive path NF <2.1 dB
• PA bypass mode
• LNA low current mode with external resistor
• LNA bypass mode
• Integrated control logic
• Internal RF match and bias circuits
• All RF ports internally DC blocked
• Shutdown mode
• Small footprint, MCM (28-pin, 6 x 6 mm) package (MSL3,
260 °C per JEDEC J-STD-020)
Description
Skyworks SKY65364-11 is a high performance, transmit/receive
(T/R) Front-End Module (FEM). The device provides a complete
T/R chain with T/R switches.
The device transmit chain features +30.5 dBm output power and
a 40 percent Power Added Efficiency (PAE).
The device receive chain features a Low Noise Amplifier (LNA)
with a 1.7 dB Noise Figure (NF) and 16.0 dB gain. The cascaded
NF and gain, taking into account the 0.5 dB insertion loss
transmit/receive antenna switch, are 2.2 dB and 15.5 dB,
respectively, which makes the SKY65364-11 ideal for medium
power microwave links such as 900 MHz Industrial, Scientific,
and Medical (ISM) band applications.
The module also has a shut-down mode, PA bypass mode, and
LNA bypass mode to minimize power consumption.
The device is mounted in a 28-pin, 6 x 6 mm Multi-Chip Module
(MCM) Surface-Mounted Technology (SMT) package, which
allows for a highly manufacturable low-cost solution.
The device package and pinout for the 28-pin MCM are shown in
Figure 1. A block diagram of the SKY65364-11 is shown in
Figurehttp://www.DataSheet4U.net/ 2. Signal pin assignments and functional pin descriptions
are provided in Table 1.
Figure 1. SKY65364-11 Pinout – 28-Pin MCM
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201576B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 3, 2012
1
datasheet pdf - http://www.DataSheet4U.net/
1 page DATA SHEET • SKY65364-11 T/R FRONT-END MODULE
Table 5. SKY65364-11 DC Electrical Specifications (Note 1)
(VCC_RX = VDD1 = 3.0 V to 3.45 V, VCC_TX1/2/3 = VDD2 = 3.4 V to 3.8 V, TC = –40 °C to +85 °C, RBIAS = 0 Ω, No RF Input Power, Unless
Otherwise Noted)
Parameter
Symbol
Test Condition
Min Typical Max
Units
Quiescent current, receive mode (Note 2)
IQ_RX
20 mA
Quiescent current, receive low current mode IQ_RX_LC
(Note 2) (Note 3)
RBIAS = 3.8 kΩ
5 mA
Quiescent current, receive bypass mode
(Note 2)
IQ_BYP
34 76 μA
VDD1 quiescent current, transmit mode
IQ_VDD1
25 30 mA
VCC_TX1/2/3 quiescent current, transmit
mode
IQ_TX
TC = 25 °C,
VCC_TX1/2/3 = 3.6 V,
VCC_RX = 3.3 V
55
mA
VCC_TX1/2/3 operating current, transmit
mode
IOP_TX
PIN = +10 dBm
730 880 mA
VDD1 quiescent current, transmit bypass
mode (Note 3)
IDD1
10 μA
VCC_TX1/2/3 quiescent current, transmit
bypass mode (Note 3)
IQ_TXB
0.030
μA
VCC_RX quiescent current, shutdown mode
(Note 3)
IQ_SD_RX
0.025
μA
VCC_TX1/2/3 quiescent current, shudown
mode (Note 3)
IQ_SD_TX
0.030
μA
Digital input current, logic 1 (Note 3)
IIH
33 μA
Digital input current, logic 0 (Note 3)
IIL
0 μA
Note 1: Performance is guaranteed only under the conditions listed in this Table. Modes are established as indicated in Table 2.
Note 2: Total current drawn from VCC_RX and VDD1 supplies.
Note 3: Not production tested.
http://www.DataSheet4U.net/
Table 6. SKY65364-11 Electrical Specifications: Receive and Receive Bypass Mode (1 of 2) (Note 1)
(VCC_RX = VDD1 = 3.0 V to 3.45 V, VCC_TX1/2/3 = VDD2 = 3.4 V to 3.8 V, TC = –40 °C to +85 °C, f = 900 to 960 MHz, 50 Ω Source and
Load Impedance, CW Input, RBIAS = 0 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min Typical Max
Units
Receive Mode: RX2 to Receive Output Path
Small signal gain
G
13.5 16.5
dB
Noise Figure
NF TC = 25 °C,
VCC_RX = 3.3 V
1.7 2.1 dB
Noise Figure variation over temperature
1 dB Input Compression Point
3rd Order Input Intercept Point
NFTEMP
IP1dB
IIP3
1 dB gain compression
PIN = –30 dBm/tone,
200 kHz spacing
–16.5
–5.0
±0.15
–11.5
–1.7
dB
dBm
dBm
Input return loss
|S11|
8
dB
Output return loss
|S22|
8
dB
Reverse isolation
Non-harmonic spurious (Note 2) (Note 3)
Transition time (Note 2)
|S12|
PSPUR
t
VSWR 10:1, all phases
16
22 dB
–50 dBm
0.5 μs
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201576B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 3, 2012
5
datasheet pdf - http://www.DataSheet4U.net/
5 Page DATA SHEET • SKY65364-11 T/R FRONT-END MODULE
Evaluation Board Description
The SKY65364-11 Evaluation Board is used to test the
performance of the SKY65364-11 T/R FEM. A typical application
schematic diagram is provided in Figure 18. An Evaluation Board
schematic diagram is provided in Figure 19. An assembly drawing
for the Evaluation Board is shown in Figure 20 and the layer is
provided in Figure 21.
Package Dimensions
Package dimensions for the 28-pin MCM are shown in Figure 22,
and tape and reel dimensions are provided in Figure 23.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
The SKY65364-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 °C. It can be used for lead or lead-free soldering. For
additional information, refer to Skyworks Application Note, PCB
Design and SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
http://www.DataSheet4U.net/
Figure 18. SKY65364-11 Typical Application Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
201576B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 3, 2012
11
datasheet pdf - http://www.DataSheet4U.net/
11 Page |
Páginas | Total 17 Páginas | |
PDF Descargar | [ Datasheet SKY65364-11.PDF ] |
Número de pieza | Descripción | Fabricantes |
SKY65364-11 | 900 MHz Transmit/Receive Front-End Module | Skyworks Solutions |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |