|
|
PDF PLV-Z5 Data sheet ( Hoja de datos )
| Número de pieza | PLV-Z5 | |
| Descripción | Multimedia Projector | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PLV-Z5 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Multimedia Projector
MODEL PLV-Z5
PLV-Z5BK
www.DataSheet.net/
Owner’s Manual
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page  
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage due to
lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table.
The projector may fall, causing serious injury to a child or
adult, and serious damage to the projector. Use only with a
cart or stand recommended by the manufacturer, or sold with
the projector. Wall or shelf mounting should follow the
manufacturer’s instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to insure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked by
placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a bookcase unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-
conditioning equipment.
This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.
Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service
personnel.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f.www.DataSheet.net/ When the projector exhibits a distinct change in
performance, this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.
NL
Voor de klanten in Nederland
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
5
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page 
Remote Control
e wq
ON/STAND-BY
LIGHT
LAMP CONTROL
r
LAMP
NO
SHOW
FREEZE
!8
t MENU
RESET
!7
OK
y
u SCREEN
IMAGE
IMAGE ADJ.
BRIGHTNESS CONTRAST
i BRIGHT CONT. COLOR
LENS IRIS
IMAGE
o IRIS PRESET USER
COMPONENT HDMI
VIDEO C1/C2 H1/H2
!0 INFO.
S-VIDEO PC
INPUT
!6
!5
!4
!3
!2
!1
CXVT
Part Names and Functions
q POWER ON/STAND-BY button
Turn the projector on or off (pp.18, 19).
w NO SHOW button
Temporarily turn off the image on the screen (p.23).
e LIGHT button
Light up the remote control buttons for about 10 seconds
(p.22).
r LAMP CONTROL button
Select a lamp mode (pp.22, 29).
t MENU button
Open or close the On-Screen Menu (p.20).
y POINT ed7 8 buttons
Select an item or adjust the setting values in the On-Screen
Menu, or use them to pan the image in the Normal through
mode (p.35).
u SCREEN button
Select a screen size (pp.23, 34).
i BRIGHTNESS button
Adjust the brightness of a projected image (pp.23, 28).
o LENS IRIS button
Adjust the lens iris (pp.23, 29).
!0 INPUT buttons
Select an input source (p.24).
!1 INFO. button
Displaywww.DataSheet.net/ the input source information (p.41).
!2 IMAGE buttons
Select an image level (pp.23, 27).
!3 COLOR button
Adjust the color intensity of a projected image (pp.23, 28).
!4 CONTRAST button
Adjust the contrast of a projected image (pp.23, 28).
!5 IMAGE ADJ. button
Display the Image adj. Menu items one at a time and directly
adjust its image level (pp.23, 28).
!6 OK button
Execute the selected item or access the sub-menu items
(p.20).
!7 RESET button
Reset to the previous figure.
This function is limited to when selecting the Image
Adjustment (pp.28 – 31), Picture Adjustment (p.33) and the
Keystone function in the Setting (p.36).
!8 FREEZE button
Freeze the picture on the screen (p.22).
To ensure safe operation, observe the following precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply benzene,
thinner, splay, or any other chemicals.
11
Datasheet pdf - http://www.DataSheet4U.co.kr/
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet PLV-Z5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PLV-Z5 | Multimedia Projector | Sanyo |
| PLV-Z5BK | Multimedia Projector | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |