|
|
PDF TND027SW Data sheet ( Hoja de datos )
| Número de pieza | TND027SW | |
| Descripción | Excellent Power Device | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TND027SW (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
Ordering number : EN7437C
TND027SW
SANYO Semiconductors
DATA SHEET
TND027SW
ExPD(Excellent Power Device)
Lowside Power Switch Lamp-, Solenoid-,
and Motor-Driving Applications
Features
• N-channel MOSFET built in
• Overheat protection (Self recovery type)
• Overcurrent protection (Self recovery type current limiting function)
• Overvoltage protection
• Incorporates two sets of circuit
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Drain-to-Source Voltage
Output Current
Input Voltage
Allowable Power Dissipation
Operating Supply Voltage
Operating Temperature
Junction Temperature
Storage Temperature
Symbol
VDS
IO(DC)
VIN
PD
VDS(opr)
Topr
Tj
Tstg
Conditions
When mounted on ceramic substrate (1200mm2×0.8mm) Iunit
When mounted on ceramic substrate (1200mm2×0.8mm)
Ratings
60
1.5
--0.3 to +10
1.3
1.7
40
--40 to +85
150
--55 to +150
Unit
V
A
V
W
W
V
°C
°C
°C
Package Dimensions
unit : mm (typ)
7005A-005
5.0
85
0.2
Product & Package Information
• Package
: SOP8
• JEITA, JEDEC
: SC-87, SOT-96
• Minimum Packing Quantity : 1,000 pcs./reel
Packing Type: TL
Marking
1
1.27
0.1
1 : GND1
2 : IN1
3 : GND2
4 4 : IN2
0.43 5 : OUT2
6 : OUT2
7 : OUT1
8 : OUT1
TL
Block Diagram
TND
027
LOT No.
Overcurrent
protective
circuit
OUT(D)
Overvoltage
protective circuit
SANYO : SOP8 IN
Output current
control
ESD
protective
circuit
Overheat
protective
circuit
Gate
shutdown
circuit
GND(S)
http://semicon.sanyo.com/en/network
O2611 TKIM/D2607IP TIIM TC-00001114/O2203 TSIM/51503 TSIM TA-100479 No.7437-1/5
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
TND027SW
Operation Description
• The output power MOSFET will be turned on when the input voltage exceeds the input threshold voltage (4 to 6V
is recommended), and then the lamp will be turned on by the current flowing to the lamp. Conversely, the output
power MOSFET will be turned off when the input voltage goes below the input threshold voltage, and the lamp
will be turned off.
• The inrush current that occurs during normal lamp operation is limited to a preset value by the built-in overcurrent
protecting circuit, which makes the lamp life longer.
• The internal overcurrent protection function limits the current of output power MOSFET when output current of at
least the overcurrent detecting current value flows at load short. Besides, if the device temperature exceeds the
allowable power dissipation, overheat protection function protects the power switch from being broken down by
turning off the current of output power MOSFET when Tj comes to 150°C (typical).
• As an example of application circuit, DC voltage can also be controlled as a solenoid drive.
Addition
• The diode between OUT and GND in the block diagram is parasitic diode of the MOSFET.
• Not apply a voltage on IN terminal during the period when OUT voltage is lower then GND voltage when driving
a solenoid or a motor.
• Be sure connect a diode between OUT terminal and GND terminal when you want to apply a voltage on IN terminal
under the above-stated state (that is, OUT Voltage < GND Voltage).
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of October, 2011. Specifications and information herein are subject
to change without notice.
PS No.7437-5/5
Datasheet pdf - http://www.DataSheet4U.net/
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TND027SW.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TND027SW | Excellent Power Device | Sanyo Semicon Device |
| TND027SW | Excellent Power Device |  ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |