|
|
PDF LMC01B Data sheet ( Hoja de datos )
| Número de pieza | LMC01B | |
| Descripción | LED Modules | |
| Fabricantes | Citizen Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LMC01B (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet.co.kr
DATA SHEET
1. Features
- Direct operation from AC source (AC220～240V）is available.
- New LED driving method is adopted.
- Product lineup consists of luminous flux 800lm, color temperatures of 3000k, 4000k.
- High dielectric strength voltage is equipped.
- Small and thin size.
- Compliant with RoHS directives.
- Compliant with CE standard (Europe).
LMC01B
1/7
2. Application
- Downlights
- Spotlights and so on.
3. Outline drawing
- Unit ： mm
- Tolerance : ±0.8
- Tc point: Case temperature measuring point
- wire color: Brown(live), Blue(neutral)
CITIZEN ELECTRONICS CO.,LTD
LMC01B-23L183A-20 Built-in module
AC220-240V/50-60Hz tc=60degC
Citizen Electronics Co., Ltd.
Ref.CE-P1691 11/11
Datasheet pdf - http://www.DataSheet4U.net/
1 page  
www.DataSheet.co.kr
DATA SHEET
LMC01B
5/7
6. Precautions for use
(1) Usage environment and storage
・ Do not use or store the product under the environment where gas of chlorine, sulfur,
acidity, chlorine, or salt are compressed or condensed, or any substance which causes
corrosion exists. Avoid using the product in the sealed space.
・ In the case the product is used by bonding, or connected to other parts as one unit,
ensure that there is no quality influence on the product through an appropriate verification.
・ Store the product in the ambient temperature of 5-40 degree C, humidity of 20-70%,
Recommended storage period is three(3) months. If you use the product after 3 months
are passed, please check electrical connectivity before use.
・ Use in dry place in doors. (The product is not waterproof.)
・ Do not use as a light fitting or an indicating light for an emergency exit.
・ Do not connect the product to the fitting which connects to diming equipment.
(2) Handling
・For the sake of safety, do not look at LED lighting source directly.
・Flicker is created due to direct operation from AC source.
Sufficient verification is required when the product is equipped with a device.
・Since this product is designed so as to be used as being assembled in a general lighting fixture,
please do not use this product only.
When assembling to a lighting fixture, ensure sufficient evaluation as a lighting fixture.
・Reflow soldering is not applicable.
Ultrasonic cleaning is not applicable.
・Do not use cleaning agent nor chemical agent as they can cause discoloration or quality deterioration.
・Excessive shock such as a drop, vibration, or heat which exceeds absolute maximum rating must not
be applied to the product because not only deterioration of performance of the product
but also degradation of the value of equipped dielectric strength voltage can occur by handling.
・Avoid contacting the product with a sharp metalic nail and so on to the resin portion.
Do not bend nor twist by adding exterior stress.
Such handling brings about stress to the soldering part or to the insulation layer of PCB
and causes the product no-lighting up, shortning lifetime and destruction as a worst case.
・As LEDs of this product are driven by applying AC source directly, LED part is in high
voltage. Do not detach the transparent cover which is equipped covering LED top face of
the module, nor use the product without the cover, as such usage is very risky.
・Although this product is equipped with fuses and a temperature fuse, ensure safety measures
sufficiently on your product.
・When using this product, make sure to check that there is no contamination nor foreign substrances
on the transparent cover over the light emission part.
(For example, black dots, colored tapes or markings etc.)
Or, in the worst-case scenario, such contamination or foreign substances on the transparent cover
cause melting of the cover.
・When handling electric wire for connecting power source, pay full
attention not to scratch the coat of wire nor apply pressure by nipping forcibly.
(3) Handling of static electricity
・As these products are sensitive to statistics electricity charge, pay attention when
handling and take measures to prevent any static electricity being produced
by wearing of a wristband or anti-static gloves and so on.
・All equipment and devices relating to this product must be properly grounded.
・After assemblying in device, make sure that there is no damage (leak).
・Detect any damage due to static by a light-on test.
・Altough dielectric strength voltage of 4KV is equipped in this product, for the sake of safety,
adding insulating function is strongly recommended in your product,
for example by insulating your product doubly or triply.
(4) Driving circuit
・This product must be used within the range of rated voltage.
Citizen Electronics Co., Ltd.
Ref.CE-P1691 11/11
Datasheet pdf - http://www.DataSheet4U.net/
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet LMC01B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LMC01B | LED Modules | Citizen Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |