|
|
PDF TLE7234E Data sheet ( Hoja de datos )
| Número de pieza | TLE7234E | |
| Descripción | 8 Channel High-Side and Low-Side Relay Switch | |
| Fabricantes | Infineon Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLE7234E (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
Data Sheet, Rev. 1.0, October 2008
SPIDER - TLE7234E
8 Channel High-Side and Low-Side Relay Switch
Automotive Power
1 page  
TLE7234E
Overview
Detailed Description
The TLE7234E is an eight channel high-side and low-side relay switch providing embedded protective functions.
The output stages incorporate two low-side switches (0.9 Ω per channel), four high-side switches (two channels
with 0.9 Ω and two channels with 1.6 Ω) and two auto-configuring high-side or low-side switches (0.9 Ω per
channel). The auto-configuring switches can be utilized in high-side or low-side configuration just by connecting
the load accordingly. They are also suitable to switch a 5 V supply line in high-side configuration. Protective and
diagnostic functions adjust automatically to the chosen configuration.
The 8 bit serial peripheral interface (SPI) is utilized for control and diagnosis of the device and the loads. The SPI
interface provides daisy chain capability in order to assemble multiple devices in one SPI chain by using the same
number of micro-controller pins.
Furthermore, the TLE7234E is equipped with three input pins that can be individually routed to the output control
of each channel thus offering complete flexibility in design and PCB-layout. The input multiplexer is controlled via
SPI.
The device provides full diagnosis of the load via open load, over load and short circuit detection. SPI diagnosis
flags indicate latched fault conditions that may have occurred.
Each output stage is protected against short circuit. In case of over load, the affected channel switches off. There
are temperature sensors available for each channel to protect the device against over temperature.
The device protects itself with a build in reverse polarity protection which prohibits intrinsic current flow through
the logic during reverse polarity. However the output stages still incorporate a reverse diode where current can
flow through during reverse polarity.
The power transistors are built by N-channel power MOSFETs. The inputs are ground referenced CMOS
compatible. The device is monolithically integrated in Smart Power Technology.
Data Sheet
5 Rev. 1.0, 2008-10-30
5 Page 
TLE7234E
Electrical Characteristics
Tj = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Absolute Maximum Ratings1)
Pos. Parameter
Symbol Limit Values Unit Test Conditions
min. max.
4.1.11 Maximum energy dissipation one channel EAR
repetitive pulses for ch. 2,3
mJ 2)
1 · 104 cycles
1 · 106 cycles
Logic Pins
– 12
– 11
Tj(0) = 105 °C
ID(0) = 0.180 A
Tj(0) = 105 °C
ID(0) = 0.180 A
4.1.12 Voltage at input pins
4.1.13 Voltage at chip select pin
4.1.14 Voltage at serial clock pin
4.1.15 Voltage at serial input pin
4.1.16 Voltage at serial output pin
Temperatures
VIN -0.3 VDD + 0.3 V
VCS -0.3 VDD + 0.3 V
VSCLK -0.3 VDD + 0.3 V
VSI -0.3 VDD + 0.3 V
VSO -0.3 VDD + 0.3 V
3)
3)
3)
3)
3)
4.1.17 Junction Temperature
4.1.18 Storage Temperature
ESD Susceptibility
Tj
-40 150
°C –
Tstg -55 150 °C –
4.1.19 ESD susceptibility on all pins
VESD
-2
2
1) not subject to production test
2) Pulse shape represents inductive switch off: IL(t) = IL(0) * (1 - t / tpulse); 0 < t < tpulse
3) VDD + 0.3 V < 5.5 V
4) ESD susceptibility, HBM according to EIA/JESD 22-A114
kV HBM4)
4.2 Functional Range
Pos.
4.2.1
4.2.2
4.2.3
Parameter
Supply Voltage Range for
Nominal Operation
upper Supply Voltage Range for
Extended Operation
lower Supply Voltage Range for
Extended Operation
Symbol
Vbb(nom)
Limit Values
Min.
Max.
9 16
Vbb(ext),up 16
28
Vbb(ext),low 5.5
9
Unit Conditions
V–
V Parameter
Deviations possible
V Parameter
Deviations possible
4.2.4 Junction Temperature
Tj -40
150 °C –
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
4.3 Thermal Resistance
Note: This thermal data was generated in accordance with JEDEC JESD51 standards.
For more information, go to www.jedec.org.
Data Sheet
11 Rev. 1.0, 2008-10-30
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet TLE7234E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLE7234E | 8 Channel High-Side and Low-Side Relay Switch | Infineon Technologies |
| TLE7234EM | SPI Driver | Infineon Technologies |
| TLE7234G | 8 Channel High-Side and Low-Side Relay Switch | Infineon Technologies |
| TLE7234SE | SPI Driver | Infineon Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |