|
|
PDF RS92NA Data sheet ( Hoja de datos )
| Número de pieza | RS92NA | |
| Descripción | High Precision Foil Resistor | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RS92NA (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
RS92N, RS92NA, AN
Vishay Foil Resistors
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.01 % and Load Life Stability
of ± 0.005 % CECC Qualified
FEATURES
• Temperature coefficient of resistance (TCR):
± 2 ppm/°C typical (- 55 °C to + 155 °C, ref. + 20 °C)
• Resistance range: 80.6 Ω to 120 kΩ
INTRODUCTION
Bulk Metal® Foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications. BMF
technology allows us to produce customer orientated
products, designed to satisfy challenging and specific
technical requirements.
Models RS92N, RS92NA, and AN made from Vishay BMF
offers low TCR, excellent load life stability, tight tolerance,
fast response time, low current noise, low thermal EMF and
low voltage coefficient, all in one resistor.
The RS92N, RS92NA, and AN are virtually insensitive to
destabillizing factors. The resistor element is a solid alloy
that displays the desirable bulk properties of its parent
material, thus it is inherently stable and noise free.
Vishay’s Bulk Metal® RS92N, RS92NA, and AN resistors are
the modern generation of precision resistors. The standard
design of these resistors provides a unique combination of
characteristics found in no other single resistor.
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
• Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
• Rated power: to 0.25 W at + 125 °C
• Tolerance: ± 0.01 %
• Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated
power
• Electrostatic discharge up to 25 000 V
• Non inductive, non capacitive design
• Rise time: 1 ns effectively no ringing
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Low inductance: < 0.08 µH typical
• Non hot spot design
• Terminal finish available: tin/lead alloy
• Matched sets are available per request
(TCR Tracking: to 0.5 ppm/°C)
• For better TCR and PCR performances please review the
RNC90Z and Z555 datasheets
TABLE 1 - TOLERANCE AND TCR VS. RESISTANCE VALUE (- 55 °C to + 155 °C, + 20 °C Ref.)
RESISTANCE VALUE
(Ω)
TOLERANCE
(%)
TYPICAL TCR AND MAX. SPREAD
(ppm/°C)
80.6 to 120K
± 0.01
±2±3
TABLE 2 - MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
Mechanical Protection
Insulated case
Resistive Element
Nickel-chromium
Unit Weight
0.3 g
Temperature Limits
- 55 °C to + 155 °C
Climatic Category
55/155/56
Document Number: 63138
Revision: 28-Jan-09
For any questions, contact: [email protected]
www.vishay.com
1
1 page  
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet RS92NA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RS92N | High Precision Foil Resistor | Vishay |
| RS92NA | High Precision Foil Resistor | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |