PDF VS-700 Data sheet ( Hoja de datos )

Número de pieza	VS-700
Descripción	Crystal Oscillator
Fabricantes	Vectron International
Logotipo
Hay una vista previa y un enlace de descarga de VS-700 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas
No Preview Available ! VS-700 Voltage Controlled SAW Oscillator VS-700 Description The VS-700 is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter. The SAW filter is a high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. The oscillator is housed in a hermetically sealed leadless surface mount package offered on tape and reel. It has an output disable to facilitate on-board testing. Features Applications • Industry Standard Package, 5.0 x 7.5 x 2.5 mm • Output Frequencies from 500 MHz to 850 MHz • 3.3 V Operation • Low Jitter < 0.25 ps-rms across 50 kHz to 80 MHz • LV-PECL Configuration with Fast Transition Times • Complementary Outputs • Output Disable Feature • Product is free of lead and compliant to EC RoHS Directive PLL circuits for clock smoothing and frequency translation Description Standard • 1-2-4 Gigabit Fibre Channel INCITS 352-2002 • 10 Gigabit Fibre Channel INCITS 364-2003 • 10GbE LAN / WAN IEEE 802.3ae • OC-192 ITU-T G.709 • SONET / SDH GR-253-CORE Issue4 • WiMax IEEE 802.16 Block Diagram Vcc COutput Output www.DataSheet4U.com SAW Vc OD Gnd Page1 of 7 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 08Dec2009 1 page Reliability VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and IR reflow simulation. The VS-700 family is capable of meeting the following qualification tests: Parameter Mechanical Shock Mechanical Vibration Solderability Gross and Fine Leak Resistance to Solvents Environmental Compliance Conditions MIL-STD-883, Method 2002 MIL-STD-883, Method 2007 MIL-STD-883, Method 2003 MIL-STD-883, Method 1014 MIL-STD-883, Method 2016 Handling Precautions Although ESD protection circuitry has been designed into the VS-700 proper precautions should be taken when handling and mounting. VI employs a human body model (HBM) and a charged-device model (CDM) for ESD susceptibility testing and design protection evaluation. Model Human Body Model Charged Device Model ESD Ratings Minimum 1500V 1000V Conditions MIL-STD-883, Method 3015 JEDEC, JESD22-C101 Parameter PreHeat Time Ramp Up Time Above 217 °C Time To Peak Temperature Time at 260 °C Ramp Down Reflow Profile (IPC/JEDEC J-STD-020C) Symbol tS R UP t L T AMB-P t P R DN Value 60 sec Min, 180 sec Max 3 °C/sec Max 60 sec Min, 150 sec Max 480 sec Max 20 sec Min, 40 sec Max 6 °C/sec Max The device has been qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time intervals listed are based on the Pb-Free small body requirements. The temperatures refer to the topside of the package, measured on the package body surface. The VS-700 device is hermetically sealed so an aqueous wash is not an issue. www.DataSheet4U.com Page5 of 7 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Rev: 08Dec2009 5 Page

Páginas	Total 7 Páginas
PDF Descargar	[ Datasheet VS-700.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
VS-700	VOLTAGE CONTROLLED SAW OSCILLATOR	ETC
VS-700	Crystal Oscillator	Vectron International
VS-700-LFF	VOLTAGE CONTROLLED SAW OSCILLATOR	ETC
VS-700-LFF-GNN	VOLTAGE CONTROLLED SAW OSCILLATOR	ETC

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar