|
|
PDF MFEV710 Data sheet ( Hoja de datos )
| Número de pieza | MFEV710 | |
| Descripción | Pegoda EV710 SAM support | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MFEV710 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
MFEV710
Pegoda EV710
Rev. 3 — 14 February 2011
202630
Product short data sheet
PUBLIC
1. General description
The new Pegoda is NXP’s latest generation of reference designs for secure MIFARE
applications. Built around proven, well-established MIFARE solutions and powerful ARM
Cortex-M3 processors, these design in kits are available in two evaluation kits: the
MFEV710 and the MFEV852.
The MFEV710 design in kit includes the MFRD710 contactless smartcard reader, a
design based on the MFRC523 contactless reader IC. The kit supports the entire MIFARE
portfolio: MIFARE Classic, MIFARE DESFire, MIFARE Plus, and MIFARE Ultralight C,
including SAM AV2 (in x- and non-x modes). The kits also offer full support of MIFARE
discover, with a reader library for all the MIFARE card products.
It uses an open software concept and PC-based tools. The software code and hardware
architecture are reusable, and each kit includes a sample SAM-based, secure reader
architecture that implements multiple protocols. For added flexibility in development, the
flash-based microcontroller supports custom application development based on Pegoda
hardware. The microcontroller is open for customer code implementations, and the
design’s hardware interfaces are open for customer extensions.
The kit include native support for USB. An optional hardware extension board, available
on request, provides additional support for RS232, RS485, and Ethernet. The extension
board also has a JTAG interface, for debugging functionality directly on the
microcontroller, and is accompanied by a free embedded toolchain for firmware
customization.
The GUI supplied with each kit uses the familiar Windows look and feel and offers a range
of features, including history, log, timing profile management, key management, show
cards, and installer.
Minimum system requirements The minimum system requirements for running either
evaluation kit are as follows: Intel Pentium 166 MHz or equivalent, 32 Mbytes RAM,
20 Mbytes free hard disk space, CD-ROM drive, USB support, and Windows 7,
Windows XP, Windows Vista, or Windows Server in 32- or 64-bit version.
2. Features and benefits
2.1 Features
www.DataSheet4U.com
Multiprotocol ISO/IEC 14443 and MIFARE operation
PC/SC-based architecture on widely deployed hardware solutions
Full support for entire MIFARE card portfolio and MIFAREdiscover
SAM support in standard or x-mode
1 page  
NXP Semiconductors
MFEV710
Pegoda EV710
The contact part of the reader firmware is used to communicate with a SAM, ideally the
MIFARE SAM AV2, see Ref. 2. The contactless part performs the polling and activation
sequence according to PC/SC part 2, ISO/IEC 14443-3 and 14443-4 standards.
The polling and activation sequence can be turned off and on with the use of escape
(PC/SC part 3) commands. The polling and activation sequence is automatically disabled
if escape commands are executed that would interfere with the normal operations. The
firmware also interprets the ADPUs for MIFARE which are defined in PC/SC part 3.
The main modes of operation are being set by DIP switches which are located on the
reader. Some configuration parameters can be set with the escape commands. The
reader will store them in non-violate memory. The user will be able to reset the
configuration back to default state.
The firmware will construct the product name – which is returned by USB descriptor – to
easily identify the reader/SAM configuration. Depending on the DIP switches, there are
three possible configurations:
• No SAM (Pegoda N)
• SAM in X-Mode (Pegoda X)
• SAM in S-Mode (Pegoda S)
The user will be able to flash the board with customized or original firmware with three
methods:
• Over USB (IAP)
• Over serial port (ISP)
• Over JTAG with the use of an external program
For more information, please refer to Ref. 6. The implementation of the driver is described
in Ref. 9.
7.3.2 NXP Reader Library
The Reader Library is a special build of the functionality provided by the Basic Function
library. The desired functionality can be selected by the user and compiled dependent on
application requirements. On the CLRD710 the Reader library is implemented to be
executed on the Host PC. The library is designed to be portable, it can be ported to any
embedded environment if desired. As such it can be also ported to the controller of the
CLRD710.
www.DataSheet4U.com
The NXP reader library is encapsulated into Layers and Components written in ANSI C.
The library structure provides a modular way of programming and setting up the reader
interface.
For easy portability, the reader library consists of 4 layers:
• BAL (Bus Abstraction Layer)
• HAL (Hardware Abstraction Layer)
• PAL (Protocol Abstraction Layer)
• AL (Application Layer)
MFEV710_SDS
Product short data sheet
PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 14 February 2011
202630
© NXP B.V. 2011. All rights reserved.
5 of 12
5 Page 
NXP Semiconductors
MFEV710
Pegoda EV710
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
12.4 Licenses
Purchase of NXP ICs with ISO/IEC 14443 type B functionality
This NXP Semiconductors IC is ISO/IEC 14443 Type B
software enabled and is licensed under Innovatron’s
Contactless Card patents license for ISO/IEC 14443 B.
The license includes the right to use the IC in systems
and/or end-user equipment.
RATP/Innovatron
Technology
12.5 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
MIFARE — is a trademark of NXP B.V.
DESFire — is a trademark of NXP B.V.
MIFARE Plus — is a trademark of NXP B.V.
MIFARE Ultralight — is a trademark of NXP B.V.
13. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
www.DataSheet4U.com
MFEV710_SDS
Product short data sheet
PUBLIC
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 14 February 2011
202630
© NXP B.V. 2011. All rights reserved.
11 of 12
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet MFEV710.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MFEV710 | Pegoda EV710 SAM support | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |