|
|
Número de pieza | TMP90PM36 | |
Descripción | CMOS 8-bit Microcontrollers | |
Fabricantes | Toshiba | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TMP90PM36 (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
No Preview Available ! TOSHIBA
TLCS-90 Series
CMOS 8–Bit Microcontrollers
TMP90PM36F/TMP90PM36T
1. Outline and Characteristics
The TMP90PM36 is a system evaluation LSI having a
TMP90PM36
built-in One-Time PROM (16K byte) for TMP90CM36.
A programming and verification for the internal PROM is
acheived by using a general EPROM programmer with an adapter
socket.
The function of this device is exactly the same as the
TMP90CM36 by programming to internal PROM:
Parts No.
TMP90PM36F
TMP90PM36T
ROM
OTP 32968 x 8bit
RAM
1024 x 8bit
Package
80-FP
84-QFJ (PLCC)
Adapter Socket
No.
Under Development
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1/22
www.DataSheet.in
1 page 2.2 Pin Names and Functions
The TMP90PM36 has MCU mode and PROM mode.
TMP90PM36
(1) MCU Mode (The TMP90CM36 is pin compatible).
Table 2.2 (1/4)
TOSHIBA CORPORATION
www.DataSheet.in
5/22
5 Page 3.2 PROM Mode
(1) Mode Setting and Function
PROM mode is set by setting the RESET and CLK
pins to the “L” level.
The programming and verification for the internal
PROM is acheived by using a general EPROM pro-
TMP90PM36
grammer with the adapter socket. The device selec-
tion (ROM Type) should be “TC571000D” with the
following conditions.
Size: 1M bit (128K x 8bit), VPP: 12.75V±0.25V,
TPW: 0.1ms VCC: 6.25±0.25V
Figure 3.2 shows the setting of pins in PROM mode.
Figure 3.2. PROM Mode Pin Setting
TOSHIBA CORPORATION
www.DataSheet.in
11/22
11 Page |
Páginas | Total 22 Páginas | |
PDF Descargar | [ Datasheet TMP90PM36.PDF ] |
Número de pieza | Descripción | Fabricantes |
TMP90PM36 | CMOS 8-bit Microcontrollers | Toshiba |
TMP90PM38 | CMOS 8-bit Microcontrollers | Toshiba |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |