|
|
PDF TLRMHGH48TF Data sheet ( Hoja de datos )
| Número de pieza | TLRMHGH48TF | |
| Descripción | BI-COLOR HIGH LUMINOSITY INDICATOR | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLRMHGH48TF (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
TLRMHGH48T(F)
TOSHIBA LED Lamp InGaAlP Red/Green Light Emission
TLRMHGH48T(F)
○ BI-COLOR HIGH LUMINOSITY INDICATOR
• Lead(Pb) free(Sn-Ag-Cu)
• High Luminous Intensity.
• 5mm package
• InGaAlP Red/Green LED, the cathode is common to two colors.
• All plastic mold type.
• Transparent Lens.
Absolute Maximum Ratings (Ta = 25°C)
Unit: mm
CHARACTERISTICS
FORWARD CURRENT
REVERSE VOLTAGE
POWER DISSIPATION
OPERATING TEMPERATURE
SYMBOL
IF
VR
Topr
Tstg
RATING
50 (Note)
4
−40~100
−40~120
UNIT
mA
V
°C
°C
Stopper
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
JEDEC
JEITA
TOSHIBA
Anode(Red)
Common Cathode
Anode(Green)
―
―
4-5AR1
Note: Maximum rating of “forward current – atmospheric
temperature (i.e. IF-Ta graph in the next page)” is for each
Weight: 0.37 g (typ.)
component.
In case two components lightening, total current should be within the rating.
PRECAUTIONS
Please be careful of the followings
• Soldering temperature : 260 max Soldering time :3 s max (Soldering portion of lead : below the lead stopper of
the device)
• If the lead is formed, the lead should be formed up to below the lead stopper of the device without Formed stress
to the resin. Soldering should be performed after lead forming.
• The visible LED lamp also emits some IR light.
If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTICS
FORWARD VOLTAGE
REVERSE CURRENT
LUMINOUS INTENSITY
SPECTRAL LINE HALF WIDTH
DOMINANT WAVELENGTH
SYMBOL TEST CONDITION
Red
Green
Red
Green
Red
Green
Red
Green
Red
Green
VF IF = 20mA
IR VR = 4V
IV IF = 20mA
Δλ IF = 20mA
λd IF = 20mA
MIN
⎯
⎯
⎯
⎯
476
272
⎯
⎯
⎯
⎯
TYP
1.95
2.05
⎯
⎯
1100
500
13
13
626
571
MAX
2.4
2.4
50
50
⎯
⎯
⎯
⎯
⎯
⎯
UNIT
V
uA
mcd
nm
nm
1 2007-10-01
www.DataSheet.in
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet TLRMHGH48TF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLRMHGH48T | BI-COLOR HIGH LUMINOSITY INDICATOR | Toshiba Semiconductor |
| TLRMHGH48TF | BI-COLOR HIGH LUMINOSITY INDICATOR | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |