|
|
PDF TLRMHGH48M Data sheet ( Hoja de datos )
| Número de pieza | TLRMHGH48M | |
| Descripción | BI-COLOR HIGH LUMINOSITY INDICATOR | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TLRMHGH48M (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
TLRMHGH48M(F)
TOSHIBA LED LAMP InGaAlP RED/GREEN LIGHT EMISSION
TLRMHGH48M(F)
○ BI-COLOR HIGH LUMINOSITY INDICATOR
• Lead(Pb) free(Sn-Ag-Cu)
• High Luminous Intensity.
• 5mm package
• InGaAlP Red/Green LED, the cathode is common to two colors.
• All plastic mold type.
• Milky white, diffusion lens.
Absolute Maximum Ratings (Ta = 25°C)
Unit: mm
CHARACTERISTICS
SYMBOL
RATING
UNIT
Stopper
FORWARD CURRENT
IF
50 (Note)
mA
REVERSE VOLTAGE
VR 4 V
POWER DISSIPATION
Topr
−40~100
°C
OPERATING TEMPERATURE
Tstg
−40~120
°C
Note: Using continuously under heavy loads (e.g. the application of high
Anode(Red)
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
Common Cathode
Anode(Green)
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the
JEDEC
―
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual
JEITA
―
reliability data (i.e. reliability test report and estimated failure rate,
TOSHIBA
4-5AR1
etc).
Note1:Maximum rating of “forward current – atmospheric
Weight: 0.37 g (typ.)
temperature (i.e. IF-Ta graph in the next page)” is for each
component.
In case two components lightening, total current should be within the rating.
PRECAUTIONS
Please be careful of the followings
• Soldering temperature : 260 max Soldering time :3 s max (Soldering portion of lead : below the lead stopper of
the device )
• If the lead is formed, the lead should be formed up to below the lead stopper of the device without Formed stress
to the resin. Soldering should be performed after lead forming.
• The visible LED lamp also emits some IR light.
If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
ELECTRICAL AND OPTICAL CHARACTERISTICS (Ta = 25°C)
CHARACTERISTICS
SYMBOL TEST CONDITION
MIN
TYP
MAX
UNIT
FORWARD VOLTAGE
REVERSE CURRENT
LUMINOUS INTENSITY
SPECTRAL LINE HALF WIDTH
DOMINANT WAVELENGTH
Red
Green
Red
Green
Red
Green
Red
Green
Red
Green
VF IF = 20mA
IR VR = 4V
IV IF = 20mA
Δλ IF = 20mA
λd IF = 20mA
⎯ 1.95 2.4
V
⎯ 2.05 2.4
⎯ ⎯ 50
uA
⎯ ⎯ 50
272 450
153 220
⎯
mcd
⎯
⎯ 13 ⎯
nm
⎯ 13 ⎯
⎯ 626 ⎯
nm
⎯ 571 ⎯
1 2007-10-01
www.DataSheet.in
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet TLRMHGH48M.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TLRMHGH48F | BI-COLOR HIGH LUMINOSITY INDICATOR | Toshiba Semiconductor |
| TLRMHGH48F | BI-COLOR HIGH LUMINOSITY INDICATOR | Toshiba Semiconductor |
| TLRMHGH48M | BI-COLOR HIGH LUMINOSITY INDICATOR | Toshiba Semiconductor |
| TLRMHGH48MF | BI-COLOR HIGH LUMINOSITY INDICATOR | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |