|
|
PDF HMC-APH634 Data sheet ( Hoja de datos )
| Número de pieza | HMC-APH634 | |
| Descripción | GaAs HEMT MMIC POWER AMPLIFIER | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC-APH634 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.0110
Typical Applications
This HMC-APH634 is ideal for:
• Short Haul / High Capacity Links
3 • Wireless LAN Bridges
• Military & Space
• E-Band Communication Systems
HMC-APH634
GaAs HEMT MMIC MEDIUM POWER
AMPLIFIER, 81 - 86 GHz
Features
High Gain: 12 dB
High P1dB: +19 dBm
Bias Supply: +4V
50 Ohm Matched Input/Output
Die Size: 2.57 x 1.70 x 0.05 mm
Functional Diagram
General Description
The HMC-APH634 is a two stage GaAs HEMT MMIC
Medium Power Amplifier which operates between
81 and 86 GHz. The HMC-APH634 provides 12
dB of gain, and an output power of up to +20 dBm
at 1 dB compression from a +4V supply. All bond
pads and the die backside are Ti/Au metallized
and the amplifier device is fully passivated for reliable
operation. The HMC-APH634 GaAs HEMT MMIC
Medium Power Amplifier is compatible with conven-
tional die attach methods, as well as thermocomp-
ression and thermosonic wire bonding, making it
ideal for MCM and hybrid microcircuit applications.
All data shown herein is measured with the chip in
a 50 Ohm environment and contacted with RF probes.
Electrical Specifications, TA = +25° C, Vdd1=Vdd2 = 4V, Idd1+Idd2 = 240mA [2]
Parameter
Min. Typ. Max.
Frequency Range
81 - 86
Gain
7 12
Input Return Loss
7
Output Return Loss
8
Output power for 1dB Compression (P1dB)
19
Supply Current (Idd1+Idd2)
240
[1] Unless otherwise indicated, all measurements are from probed die.
[2] Adjust Vgg1=Vgg2 between -0.8V to +0.3V (typ. -0.1V) to achieve Iddtotal = 240mA
Units
GHz
dB
dB
dB
dBm
mA
3 - 250
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.0110
Assembly Diagram
3
HMC-APH634
GaAs HEMT MMIC MEDIUM POWER
AMPLIFIER, 81 - 86 GHz
Note 1: Bypass caps should be 100 pF (approximately) ceramic (single-layer) placed no farther than 30 mils from the amplifier
Note 2: Best performance obtained from use of <10 mil (long) by 3 by 0.5mil ribbons on input and output.
3 - 254
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC-APH634.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC-APH633 | GaAs HEMT MMIC POWER AMPLIFIER | Hittite Microwave Corporation |
| HMC-APH634 | GaAs HEMT MMIC POWER AMPLIFIER | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |