|
|
Número de pieza | CM1214A | |
Descripción | 1- and 2-Channel PicoGuard AC Signal ESD Protector | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CM1214A (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! 1- and 2-Channel PicoGuard®www.DataSheet4U.com
AC Signal ESD Protector
CM1214A
Features
• Single channel ESD protection for an AC signal
up to ±5V for 0.25W transmit power
• Connects two channels in series for signals up to
±10V (1W transmit power)
• ±8kV ESD protection per IEC 61000-4-2 contact
discharge
• Sub-1pF loading capacitance
• Minimal variation with voltage and temperature
• Each I/O pin can withstand over 1000 ESD
strikes*
• SOT23-3 and MSOP-8 packages
• RoHS-compliant, lead-free finishing
Applications
• RF switch and amplifier protection
• RF modules and RF IC protection
• Wireless handsets and WLAN
• High-speed AC signals for Gbit ethernet, etc.
Product Description
The CM1214A PicoGuard® ESD protector is used to
protect bipolar signal lines against electrostatic
discharge (ESD). The CM1214A allows operation in
high-speed environments with signals levels up to
±5V.
The CM1214A comes in two versions:
• The CM1214A-01SO is a single channel ESD
protector and is available in a 3-lead SOT23-3
package.
• The CM1214A-02MR is a dual channel ESD
protector and is available in an 8-lead MSOP-8
package.
The low sub-1pF loading capacitance makes the
CM1214A-01SO ideal for protecting high-speed
interfaces including RF switches and amplifiers.
The CM1214A-02MR is ideal for dual high-speed
signal pairs used in Gigabit Ethernet, ADSL, etc. The
CM1214A-02MR can also be used for higher transmit
voltage applications by connecting the two channels
in series.
Both devices come in RoHS-compliant, lead-free
finishing.
Block Diagram
©2010 SCILLC. All rights reserved.
April 2010 – Rev.2
Publication Order Number:
CM1214A/D
1 page CM1214A
www.DataSheet4U.com
Performance Information
Typical Capacitance Characteristics vs. Voltage
CM1214A illustrates how the loading capacitance remains mainly flat across the voltage range from 0V to 5V,
the voltage between CH pins.
Figure 1. CM1214A Capacitance vs. Voltage
Typical Voltage Current (VI) Characteristics (low current)
CM1214A shows how the CM1214A experiences a symmetrical I/V curve, without any snapback or trigger
voltage. It gradually starts to turn on at about 6V and clamps about 7V.
Figure 2. CM1214A VI Characteristics, Low Current
Rev. 2 | Page 5 of 14 | www.onsemi.com
5 Page CM1214A
www.DataSheet4U.com
Tape and Reel Specifications
PART NUMBER
CM1214A-01SO
PACKAGE SIZE
(mm)
2.92 X 2.37 X 1.01
POCKET SIZE (mm) TAPE WIDTH
B0 X A0 X K0
W
2.77 X 3.15 X 1.22
8mm
REEL
DIAMETER
178mm (7")
QTY PER
REEL
3000
P0
4mm
P1
4mm
Rev. 2 | Page 11 of 14 | www.onsemi.com
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet CM1214A.PDF ] |
Número de pieza | Descripción | Fabricantes |
CM1214 | 1 and 2 Channel PicoGuard AC Signal ESD Protector | California Micro Devices |
CM1214 | 1 and 2-Channel AC Signal ESD Protector | ON Semiconductor |
CM1214A | 1- and 2-Channel PicoGuard AC Signal ESD Protector | ON Semiconductor |
CM1214A | 1 and 2 Channel PicoGuardTM AC Signal ESD Protector | California Micro Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |