|
|
Número de pieza | HMC489LP5 | |
Descripción | SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER | |
Fabricantes | Hittite Microwave Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HMC489LP5 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! v01.0705
HMC489LP5 / 489LP5E
www.DataSheet4U.com
SURFACE MOUNT PHEMT 1 WATT
POWER AMPLIFIER, 12 - 16 GHz
5
Typical Applications
The HMC489LP5 / HMC489LP5E is ideal for use as
a power amplifier for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios
• Test Equipment and Sensors
• Military End-Use
Features
Saturated Power: +32 dBm @ 16% PAE
+34 dBm Output IP3
13 dB Gain
+7.0 V @ 1300 mA Supply
50 Ohm Matched Input/Output
25 mm2 Leadless SMT Package
Functional Diagram
General Description
The HMC489LP5 & HMC489LP5E are high dynamic
range GaAs PHEMT MMIC Power Amplifiers housed in
leadless 5 x 5 mm surface mount packages. Operating
from 12 to 16 GHz, the amplifier provides 13 dB of gain,
+32 dBm of saturated power and 16% PAE from a +7.0
V supply voltage. Output IP3 is +34 dBm typical. The
RF I/Os are DC blocked and matched to 50 Ohms
for ease of use. The HMC489LP5 & HMC489LP5E
eliminate the need for wire bonding, allowing use of
surface mount manufacturing techniques.
Electrical Specifications, TA = +25° C, Vdd1, 2, 3, 4, 5 = +7V, Idd = 1300 mA*
Parameter
Min.
Typ. Max. Min.
Typ. Max.
Frequency Range
12 - 14
14 - 16
Gain
10 13
10 13
Gain Variation Over Temperature
0.05
0.07
0.05
0.07
Input Return Loss
12 8
Output Return Loss
8 15
Output Power for 1 dB Compression (P1dB)
24 29
28 31
Saturated Output Power (Psat)
30 32
Output Third Order Intercept (IP3)
32 34
Noise Figure
79
Supply Current (Idd)(Vdd = +7V, Vgg = -0.3V Typ.)
* Adjust Vgg between -2 to 0V to achieve Idd = 1300 mA typical.
1300
1300
Units
GHz
dB
dB/ °C
dB
dB
dBm
dBm
dBm
dB
mA
5 - 492
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page 5
v01.0705
HMC489LP5 / 489LP5E
www.DataSheet4U.com
SURFACE MOUNT PHEMT 1 WATT
POWER AMPLIFIER, 12 - 16 GHz
Pin Descriptions
Pin Number
1-3, 5-8, 10-12, 14,
15, 17-20, 22-24, 26,
27, 29-31
Function
N/C
4 RFIN
Description
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
This pin is AC coupled and matched to 50 Ohms from
12 - 16 GHz.
Gate control for amplifier. Adjust to achieve Idd of 1300 mA.
Please follow “MMIC Amplifier Biasing Procedure”
9 Vgg Application Note. External bypass capacitors of 100 pF and
2.2 μF are required.
21
RFOUT
This pin is AC coupled and matched to 50 Ohms from
12 - 16 GHz.
32, 28, 25,
13, 16
Vdd1, Vdd2,
Vdd3, Vdd4,
Vdd5
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF and 2.2 μF are required.
GND
Ground: Backside of package has exposed metal ground
slug that must be connected to ground through a short path.
Vias under the device are required
Interface Schematic
Application Circuit
Component
C1
C2
Value
100 pF
2.2 μF
5 - 496
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet HMC489LP5.PDF ] |
Número de pieza | Descripción | Fabricantes |
HMC489LP5 | SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER | Hittite Microwave Corporation |
HMC489LP5E | SURFACE MOUNT PHEMT 1 WATT POWER AMPLIFIER | Hittite Microwave Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |