|
|
PDF TPCP8601 Data sheet ( Hoja de datos )
| Número de pieza | TPCP8601 | |
| Descripción | Field Effect Transistor Silicon MOS Type | |
| Fabricantes | Toshiba Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TPCP8601 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
TPCP8601
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process)www.DataSheet4U.com
TPCP8601
High-Speed Switching Applications
DC-DC Converter Applications
Strobo Flash Applications
0.33±0.05
0.05 M A
85
Unit: mm
• High DC current gain: hFE = 200 to 500 (IC = −0.6 A)
• Low collector-emitter saturation: VCE (sat) = −0.19 V (max)
• High-speed switching: tf = 35 ns (typ.)
Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
0.475
1
0.65
2.9±0.1
4
S
0.025 S
0.17±0.02
B 0.05 M B
A
0.8±0.05
0.28 +-00..111
Collector-base voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
DC (Note 1)
Pulse (Note 1 )
VCBO
VCEO
VEBO
IC
ICP
−20
−20
−7
−4.0
−7.0
V
V
V
A
Base current
IB −0.5 A
1.Collector
2.Collector
3.Collector
4.Base
JEDEC
1.12+-00..1123
1.12+-00..1123
5.Emitter
6.Collector
7.Collector
8.Collector
0.28
+0.1
-0.11
―
Collector power
dissipation (t = 10s)
t = 10s
DC
Junction temperature
Storage temperature range
Pc (Note 2)
Tj
Tstg
3.3
1.3
150
−55 to 150
W
°C
°C
JEITA
―
TOSHIBA
2-3V1A
Weight: 0.017 g (typ.)
Figure 1.
Note 1: Ensure that the junction temperature does not exceed 150°C during
use of this device.
Note 2: Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2)
Note 3: ● on the lower left of the marking indicates Pin 1.
Circuit Configuration
(Top View)
8 7 6 5
* Weekly code (three digits):
Week of manufacture
(01 for the first week of the year, continuing up to 52 or 53)
Year of manufacture
(lowest-order digit of the calendar year)
1 2 3 4
Figure 2. Marking
(Note 3)
876 5
8601
*
1234
Type
Lot No.
(weekly code)
1 2004-12-10
1 page  
TPCP8601
www.DataSheet4U.com
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2004-12-10
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TPCP8601.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TPCP8601 | Field Effect Transistor Silicon MOS Type | Toshiba Semiconductor |
| TPCP8602 | Field Effect Transistor Silicon MOS Type | Toshiba Semiconductor |
| TPCP8603 | Field Effect Transistor Silicon MOS Type | Toshiba Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |