DataSheet.es    


PDF ESDAXLC6-1MY2 Data sheet ( Hoja de datos )

Número de pieza ESDAXLC6-1MY2
Descripción Extra low capacitance single line TVS
Fabricantes STMicroelectronics 
Logotipo STMicroelectronics Logotipo



Hay una vista previa y un enlace de descarga de ESDAXLC6-1MY2 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! ESDAXLC6-1MY2 Hoja de datos, Descripción, Manual

ESDAXLC6-1MY2
Extra low capacitance single line TVS
Features
Extra low capacitance 0.35 pF max on a wide
frequency spectrum (200 MHz - 3000 MHz)
Unidirectional device
Low clamping factor VCL/VBR
Fast response time
Very thin package: 0.55 mm max
Low leakage current
High ESD protection level
High integration
Suitable for high density boards
Complies with the following standards
IEC 61000-4-2 level 4
MIL STD 883G-Method 3015-7: class 3B
Applications
Where transient over voltage protection and
electrical overstress protection in sensitive
equipment is required, such as:
www.DataSheeCt4oUm.cpomuters
Printers
Communication systems
Cellular phone handsets and accessories
Video equipment Portable equipment
Description
The ESDAXLC6-1MY2 is a single line Transil
diode designed specifically for the protection of
integrated circuits in portable equipment and
miniaturized electronics devices subject to ESD
transient over voltages. Packaged in SOD882, it
minimizes PCB consumption.
SOD882 UT1
Figure 1. Functional diagram
I/01
I/02
GND
TM: Transil is a trademark of STMicroelectronics
January 2010
Doc ID 16923 Rev 1
1/11
www.st.com
11

1 page




ESDAXLC6-1MY2 pdf
ESDAXLC6-1MY2
3 Package information
Package information
Epoxy meets UL 94, V0
Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 3. SOD882 dimensions
INDEX AREA
(D/2 x E/2)
D
E
A A1
INDEX AREA
(D/2 x E/2)
L1
b1
b2
L2
OPTIONAL
PIN # 1 ID
e
Dimensions
Ref. Millimeters
Inches
Min. Typ. Max. Min. Typ. Max.
A 0.45 0.50 0.55 0.017 0.020 0.022
A1 0.00
0.05 0.000
0.002
b1 0.20 0.25 0.30 0.008 0.010 0.012
b2 0.20 0.25 0.30 0.008 0.010 0.012
D 1.00
0.039
E 0.60
0.024
e 0.65
0.026
L1 0.45 0.50 0.55 0.018 0.020 0.022
L2 0.45 0.50 0.55 0.018 0.020 0.022
Figure 10. Footprint (dimensions in mm) Figure 11. Marking
www.DataSheet4U.com
0.55
0.55
0.40
0.50 Pin1
7 Pin 2
Note:
Product marking may be rotated by 90° for assembly plant differentiation. In no case should
this product marking be used to orient the component for its placement on a PCB. Only pin
1 mark is to be used for this purpose.
Doc ID 16923 Rev 1
5/11

5 Page





ESDAXLC6-1MY2 arduino
ESDAXLC6-1MY2
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
www.DataSheet4U.com
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 16923 Rev 1
11/11

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet ESDAXLC6-1MY2.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ESDAXLC6-1MY2Extra low capacitance single line TVSSTMicroelectronics
STMicroelectronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar