|
|
PDF RP1032 Data sheet ( Hoja de datos )
| Número de pieza | RP1032 | |
| Descripción | 674.03 MHz SAW Resonator | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RP1032 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
®
• Designed for 674 MHz CATV Local Oscillators
• Nominal Insertion Phase Shift of 180° at Resonance
• Quartz Stability
• Rugged, Hermetic, Low-Profile TO39 Case
• Complies with Directive 2002/95/EC (RoHS) Pb
The RP1032 is a two-port, 180° surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It pro-
vides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency oscillators operating at or
near 674 MHz. Typical applications include the second LO in CATV set-top convertors with channel 3 output.
RP1032
674.03 MHz
SAW
Resonator
Absolute Maximum Ratings
Rating
CW RF Power Dissipation (See: Typical Test Circuit.)
DC Voltage Between Any Two Pins (Observe ESD Precautions)
Case Temperature
Value
+5
±30
-40 to +85
Units
dBm
VDC
°C
TO39-3 Case
Electrical Characteristics
Characteristic
Frequency (+25°C)
Nominal Frequency
Tolerance from 674.030 MHz
Insertion Loss
Quality Factor
Unloaded Q
50 Ω Loaded Q
Temperature Stability Turnover Temperature
Turnover Frequency
Frequency Temp. Coefficient
Frequency Aging
Absolute Value during First Year
DC Insulation Resistance between Any Two Pins
wwwR.DFaEtaqSuhiveaelet4nUt .RcLoCm
Motional Resistance
Motional Inductance
Motional Capacitance
Shunt Capacitance
Lid Symbolization (in addition to Lot and/or Date Codes)
Sym
fC
∆fC
IL
QU
QL
TO
fO
FTC
|fA|
RM
LM
CM
CO
Notes
2, 3, 4, 5,
2, 5, 6
5, 6, 7
6, 7, 8
1, 6
5
5, 6, 7, 9
5, 6, 9
Minimum
673.930
Typical
8.9
8,400
5,400
58 73
fC+58
0.037
10
1.0
180
358.641
0.155461
1.3 1.6
RFM 1032-3
Maximum
674.130
±100
12.5
Units
MHz
kHz
dB
88 °C
kHz
ppm/°C2
ppm/yr
MΩ
322 Ω
µH
fF
1.9 pF
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above
+65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
2. The frequency fC is the frequency of minimum IL with the resonator in the specified test fixture in a 50 Ω test system with VSWR ≤ 1.2:1. Typically, fOS-
CILLATOR or fTRANSMITTER is less than the resonator fC.
3. One or more of the following United States patents apply: 4,454,488; 4,616,197.
4. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer.
5. Unless noted otherwise, case temperature TC = +25°C± 5°C
6. The design, manufacturing process, and specifications of this device are subject to change without notice.
7. Derived mathematically from one or more of the following directly measured parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.
8. Turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fO. The nominal frequency at any case temperature, TC, may be cal-
culated from: f = fO [1 - FTC (TO - TC)2]. Typically, oscillator TO is 20° less than the specified resonator TO.
9. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance CO is
the measured static (nonmotional) capacitance between either pin 1 and ground or pin 2 and ground. The measurement includes case parasitic capaci-
tance.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-9148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: [email protected]
http://www.rfm.com
RP1032-102699
Page 1 of 2
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet RP1032.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RP1032 | 674.03 MHz SAW Resonator | RF Monolithics |
| RP103K | MARK INFORMATIONS SERIES MARK SPECIFICATION |  RICOH electronics devices division |
| RP103N | MARK INFORMATIONS SERIES MARK SPECIFICATION | RICOH electronics devices division |
| RP103x | LOW NOISE 150mA LDO REGULATOR | RICOH electronics devices division |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |